1. GOBO ENTERPRISE CO.,LTD 直正精密股份有限公司

32. Part Name: REINF - HOOD Thickness: 0.85 mm (Crash Form) Material: MS8580 6016 (Aluminum)

33. Part Name: HOOD SLAM REINF Thickness: 0.80 mm (Draw Form) Material: MS 8580 A96016-T43 (Aluminum)

34. Part Name: REINF - HOOD Thickness: 1.95 mm (Crash Form) Material: MS8580 6016 (Aluminum)

35. Part Name: LAP BRACKET Thickness: 3.50 mm Material: S420MC EN10149-2 (60.9 Ksi) ATS In Die Tapping

36. Part Name: BELT BRACKET Thickness: 3.50 mm Material: S420MC EN10149-2 (60.9 Ksi) ATS In Die Tapping

37. Part Name: REAR PIVOT BRACKET Thickness: 2.50 mm Material: S500C CDC-SDC-G041 (72.5 Ksi) (ATS In Die Tapping)

38. Part Name: OUTER HEAT SHIELD LOWER Thickness: 1.50 mm Material: ASTM S40900, TYPE 409 Part Name: OUTER HEAT SHIELD UPPER Thickness: 1.20 mm Material: ASTM S40900, TYPE 409 Part Name: OUTER HEAT SHIELD MID Thickness: 1.20 mm Material: ASTM S40900, TYPE 409

39. Thanks For Your Attention 直正精密股份有限工司 GOBO Enterprise Co., Ltd. ADDRESS: NO. 8 BENG-GONG 1ST RD., BEN- CHOU INDUSTRIAL ZONE GANG-SHAN TOWN, KAOHSIUNG COUNTY 82059, TAIWAN R.O.C TEL: 886-7-623-1122 FAX: 886-7-623-1220 EMAIL: gobop@ms26.hinet.net WEBSITE: www.gobod.com.tw