1. Honeywell Analytics Fire Alarm Aspiration Sensing Technology (FAAST) from System Sensor

2. Business Protection Earliest warning: 30-60 minutes before combustion
Unsurpassed sensitivity %/ft (.0015%/m) obscuration
Competition offers .0015%/ft (.005%.m) obscuration
UL listing for EWFD and VEWFD ensuring rapid response times
Dual source optical smoke detection to improve detection decision making
Blue LED covers the widest ranges of fires
Competition use only a single infra-red laser – prone to nuisance issues
Infra-red laser used to detect dust
Advanced algorithms to discriminate dust from smoke

3. Business Protection Full detection strategy can be deployed
Most alarm levels
5 alarm levels can be programmed
latching or non-latching
0 to 60 second delay available
Monitored via Ethernet connection with static IP address
notification
Acclimate or Day/Night/Weekend mode
Allows the system to recognize normal background in each facility setting

4. No Business Disruption
Dual light source generates data for algorithms to discriminate particulate types reducing false alarms – exclusive to FAAST
Infra-red high powered laser source
Particles analyzed within chamber to reject dust
Exclusive Acclimate mode automatically adjusts within your specified parameters to reduce nuisance alarms and adjust to current conditions
Multi-stage filtering to prevent dust and nuisance alarms
Patented particle separator
Replaceable 30 micron filter
Electronic nuisance
Rejection through algorithms

5. Reliability and Peace of Mind
5-levels of alarm level indication
10-levels of particulate indication
Fault indicators exhibit a broad spectrum of events
Major and Minor event notification
Filter change pre-warning
Ultrasonic flow detection for high and low flow events
Multi-level security – access codes prevent unwanted changes to the system
No hidden costs with add-on accessories – No extra charges for displays, relays, programmer, that could add up and cost you the project

6. Reliability and Peace of Mind
Dual Flow Monitoring Verification
Pipe Network
Ultrasonic
Ensures that air is reaching detector
Verifies that network has not been compromised
Across Sensors
Thermal Sensor, Transistors
Ensures that air is traveling across sensor
Verifies that air is passing through filter and across sensors

7. Reduced Lifetime Cost of Ownership
Acclimate mode allows the device to adapt to its environment within 24 hours – not up to 15 days
Retrofit installations with existing pipe networks are possible eliminating the expense of starting over
Superior wiring access
Only 1 filter to change through the front panel door – changing every 4 years, twice as long as the market leader
Particle separator removes larger contaminates before they enter the detection chamber extending the life of the device
One fan with a >7 year fan life

8. Installation Ease Mounting bracket Internal Manifold Design
Provides simply, secure wall mounting provisions
Save time and money
Internal Manifold Design
Enables pipe connection from top or bottom of the unit
Simplifies under the floor pipe networks
One product for above ceiling, below ceiling & below floor applications
Easy Access Plug-in wiring terminals and various conduit openings
Reduces time spent wiring
24 Hour vs. typical 15 day burn in time
Enables the system to be up and operational in a fraction of the time

9. Pipe Network
Large coverage area with a single chamber device: sq. ft. (800m2)
Maximum single length of pipe 262ft (80m)
Maximum amount of inlet sample holes – 40 holes
Maximum length of each pipe in a two pipe network – 165ft (50m)
External pipe diameter - standard ¾” inch pipe
Internal pipe diameters may vary
inches (15-21mm)
Pipe network materials of construction may vary
PVC, CPVC, ABS, Copper, Stainless, etc.

10. Example Pipe Network Sample Inlet Sample Inlets Each Pipe165ft (50m)
Single Pipe
262ft (80m)
(or Max 40 inlet holes)
Each Pipe165ft (50m)
(or Max 20 inlet holes each)
Sample
Exhaust
Sample
Exhaust

11. Pipe Inlet Holes
Sample Inlet
On a single pipe network there may be a maximum of 262 feet.
Inlet sample hole sizes may vary in size
Range from 5/64” – ¼” (2-6mm)
Travel time from the furthest hole will vary depending on application
Limited to a maximum of 120 seconds by PipeIQ software
PipeIQ software will guide the user through a proper installation of inlet holes and pipe layout for each application
Sample
Exhaust

12. Integrated Communication Advantage
Ethernet connection allows you to monitor your system from almost any location worldwide via the internet!!
notification from the device of a specific alarm level, fault level, or isolate condition can be sent to up to 6 addresses
PipeIQ software can configure, design pipe layouts and monitor the system
8 form C relays communicate alarm levels, urgent and minor faults and isolate; uses 3AMP programmable relays for latching and non-latching – the device controls the relays
An event log tracks up to 18,000 events including alarms, faults and user actions which can be accessed via PipeIQ software or the web server interface

13. PipeIQ Software – General Tab
General facility information tab
Set detection category between very early warning to non-early warning

14. PipeIQ Software – Relays and Thresholds
Set Alarm Thresholds or enable Acclimate Mode to set automatically
Set Latching or Non-Latching relays
Set alarm delay from 0-60 seconds

15. PipeIQ Software – Network Tab
Set various passwords to protect access to the system
Set network information for Ethernet access to view on the Internet
Program 6 addresses & choose when they will receive notifications

16. PipeIQ Software – Pipe Layout
Design and layout entire pipe network using PipeIQ
Import CAD drawings to aid in the design
Software will tailor inlet hole layout and proper hole sizing

17. Ethernet Monitoring
Ethernet web-page system status monitoring – view only, no control
Monitor all FAAST systems from one computer terminal –limit install costs
Monitor FAAST systems from any location with Internet connection

18. Competitive Comparison Testing
Packer Engineering (Third Party) conducted side by
side comparison test of the FAAST unit vs. the competition
Fire test results
Units alarmed within 2 to 4 seconds of each other
Dust test results
Competition false alarmed 9 out of 9 times
FAAST immune to dust 6 out of 9 times
Dust and Fire
Competition false alarmed 9 out of 9 times – Never Detected Smoke
FAAST immune to dust 6 of 9 times – Then Detected Smoke
FAAST is 67% more immune to dust related false alarms

19. Agency Listings UL 268 Device – Air Sampling Detector
Includes DI (In-Duct) listing for ft/min air velocity
FM 3230 – Smoke Detector Standard
Also tested in-duct applications
Report Number
CSFM
MSFM
VdS (European) approval in process
Additional agencies to follow
Australia (CSIRO), Chine (CNTC), Korea, Singapore

20. Additional Resources
System Sensor landing page
Brochure
Data Sheet
Engineering Specifications
Competitive Matrix
Video Vignettes
PipeIQ Software Download
Accessories

21. FAAST Summary
FAAST offers truly best-in-class very early warning aspiration smoke detection
Widest range of sensitivity ( % to 6.25%/ft obscurity)
Dual light sources plus advanced algorithms and patented particle separator ensure the system can discriminate between nuisance dust particles and real smoke
Acclimate mode allows system to baseline facility background and continuously monitor for changes
PipeIQ software easily assists in set-up and installation of a new system
Design and layout entire sample pipe network using PipeIQ Software
Limit install costs and monitor the system via the Internet from any location

22. Thank You