We think you have liked this presentation. If you wish to download it, please recommend it to your friends in any social system. Share buttons are a little bit lower. Thank you!
Presentation is loading. Please wait.
Published byShawn Ventre
Modified over 6 years ago
Place BACK of envelope on table in front of you, with flap up and open.
Insert bunny pattern into envelope, with pattern side DOWN toward table.
Close flap (do not glue). Turn over so that bunny face is visible.
Using Black Sharpie, trace over bunny pattern as it shows through envelope.
Thicken lines with Black Sharpie for emphasis if desired.
Remove pattern piece from envelope.
Design bunny eyes, and practice drawing on scrap paper. Here are some examples.
With pencil, draw eyes on bunny face on envelope. Redraw with Black Sharpie.
Lay pink paper on top of bunny ear pattern. Using pencil, draw shape for inner ear.
Fold pink paper in half. Cut along lines to form two inner ears.
Using scissors, remove small sections of inner ear to create an interesting shape.
They might look like this.
Using glue stick, put glue on back of each inner ear. Attach on bunny’s ears.
Cut bunny out along Black Sharpie lines. Make sure to hold envelope flap closed, but not glued, while cutting. DO NOT CUT LINES AT SIDES OF BUNNY CHEEKS.
This will create a glue tab on the back of each ear.
Peel off two (1 1/2”) circle stickers and stick on bunny face as cheeks.
Using pencil mark two dots on each sticker.
Place hand inside bunny face. Carefully poke hole with compass point at each dot through front layer only. The holes are a place holder for the whiskers.
Take one piece of pipe cleaner (black or white). Bring tips together. Pinch bottom together. Open at top to form a “V” shape.
Carefully insert pipe cleaner “V” with tips toward inside of bunny face, through small holes in cheeks. Pull gently.
Shape whiskers as desired, or leave straight.
Lick glue on back of ear tabs and glue tabs down on back of each ear.
Take third circular sticker and place INSIDE of the front of bunny face, centered between ears.
Holding envelope together, punch hole through center of circle sticker.
Insert Glow stick with string attached into bunny envelope. Separate string ends, and thread each one through holes, from inside to outside.
Tie twice at top of head. Bring ends together and tie onto stick by wrapping and knotting.
Create white lotus flower which we learned in a previous lesson. Turn the bunny around and attach the lotus flower low on the bunny to create tail.
After dark, students will carefully snap glow stick to light bunny lantern.
D.T. unit 5C: Moving Toys How to make a moving toy.
Season Cubes What are the 4 seasons?. Season Cubes What are the 4 seasons? Spring Summer Fall Winter.
Step 1: What you'll need: 1. A threaded needle (ribbon, raffia, yarn, embroidery thread, you can use just about anything) 2. An awl or large needle 3.
Jennifer Wolfe NAEA CONVENTION Baltimore, MD 2010.
What you’ll need 3 sheets cream cardstock 2 sheets brown cardstock Honey Pie Paper Pad Blue Floral Paper Making Memories GCD studios Epoxy Sticker Exclusive.
Craft 1: PUMPKIN HEADS MATERIALS: -Green Yarn -Oranges -Permanent black marker -Glue -Scissors INSTRUCTIONS: 1. Draw a fun pumpkin face on the oranges.
How to Make a Homecoming Mum
Kites. Thread 3 straws on a piece of floss about 3 feet long (let gravity help you). You will need 12 of these.
Geometry Origami - Penguin What shape do we begin with?
Drawing & Painting Final Exam Book-Making Instructions.
Solar Bake Off. PROCEDURE 1.1 st person traces a flap in the top of the box. Use the ruler and marker to measure a 1½” border around the lid, on the.
*Created by Kay Wagner, Ph.D., Edina Public Schools, Edina, Minnesota Drawn images may be used freely, fair use laws apply to all other images.
You need a square piece of paper. Fold the paper in half then unfold. Fold the paper along the diagonal then unfold.Repeat with the second diagonal.
STRING ART DESIGN PROJECT
For smaller numbers of specimens For larger numbers of specimens Folding insect box Cat. No. 1002F or 1002FX Unit tray shipper with polyfoam insert Cat.
How to Make a Hot Air Balloon
Ocean Science Data Based Lesson A Guide to Construction of Materials for Ships, Ocean and Satellites (S.O.S.) Paper version This guide is intended to be.
ETwinning project “Decorate, Re-Create, Celebrate” Father Christmas Class 3 A and 3 B Incisa in Val d’Arno Primary school.
The Raven Level 2 Rubber Band-Powered Flight. Dimensions 2”
You will need one A4 card of black And a half of A4 white.
© 2021 SlidePlayer.com Inc. All rights reserved.