1. Experience of High Performance Experiments Yoshinori Kitatsuji Tokyo XP KDDI R&D Laboratories, Inc.

2. Summary Recent experiments of availability investigation for High performance application demonstrations Proposal to equipping measurement machines every networks

3. Requirements Osaka University was planning HDTV over IPv6 demonstrations in NPACI AHM in March 2003 –100Mbit/s + –From Osaka to SDSC Washington University was planning HDTV demonstration in APAN Busan Meeting –220-250Mbit/s –From Portland to Busan meeting venue

4. Osaka University HD application in March 2003 POS OC12 ATM OC12 TransPAC (Seattle) i i i R R R R R R R R R R Abilene R R Tokyo XP ATM OC12 i R R A R R i R R JGNv6 Osaka University R R A R R NPACI AHM Venue R R POS OC192

5. Learn from Osaka University HD application Every hop measurement is important to find where loss occur –Install PC equipping iperf as much as possible Osaka Univ, Tokyo Univ, SDSC (NPACI AHM venue) Long period (5 min – 30 min) period avilability should be checked –At last, the demonstration experienced unperiodically burst loss, even iperf test with short period test was clear. Seek Shaping parameter in JGNv6 –Multiple Project establishes PVCs over Japan –Service is UBR

6. Lesson for HD application, Aug 25 POS OC12 ATM OC12 GbE Genkai XP Tokyo XP WIDE Project University of Washington (Tyco DC) KOREN e! Project i ii i i i R R R R R R R R R R R R i APAN Busan Meeting Venue A A

7. Lesson for HD application (Aug. 25) (Cont.) Tokyo/Genkai XP –The first high bandwidth stream transmission by the real application through APII link between XPs Japan Gigabit Network –ATM Multiple OC12 links –Multiple Project establishes PVCs over Japan –Service is UBR –Multiple measurement machine was prepared in both XPs All machines equip IPERF. –ATM-II PIC for Juniper M20 was installed at Tokyo XP to enable over 270Mbit/s shaping for a PVC. Other Parts –Juniper supported to provide the Routers at ends of US/JP link. US/JP link (OC12 SONET) is donated from Tyco to WIDE Project. –Measurement machines equipping IPERF were installed at SRC/DST points.

8. Learn from preparation of HD application Multiple measurement point worked very well to find where loss occurs. –End-to-End test is important besides hop-by-hop test. JP src test didn ’ t shows loss but US src did. –Multiple measurement was done at the same time. Need some usage information sharing method Genkai Link has periodical loss –Another measurement machine is required to figure out what happens and where it is. Large burst size worked for real time application. –rtVBR: Peak=540Mbit/s, Sustain=500Mbit/s, Burst=4K JP-KR link and some part of APAN Tokyo XP started to support Jumbo frame.

9. Proposal form preparations of several demonstrations Performance measurement machine is getting required in every measurement point –Multiple machines should be installed to enable local loop test –UDP/TCP over IPv4/IPv6 –Authorized operators and users share machines in multiple points –Measuring status (who, how much bandwidth, how long) should be precisely updated and opened to users of measurement machine –Web based operation may helps app users to have test by them selves High performance Application using APAN/TransPAC increase. The each apps. requires more bandwidth before. Number of HP apps use or demonstration is also getting increase –Providing measurement tool to such user helps to investigate problems by themselvs

10. Proposal Configuration after TransPAC links upgrade POS OC48 ATM OC12 Genkai XP Tokyo XP KOREN e! Project ii i i i R R R R R R i i i R R StarLIGHT TransPAC (LA) ??? 2 GbE over SONET R R ii R R R R i R R Busan Seoul

11. Questions? http://www.jp.apan.net/noc/material/20030827Busan/ ExperienceOfHighPerformanceExperiment.ppt