Presentation is loading. Please wait.

Presentation is loading. Please wait.

EX.NO:3 AIRCRAFT RIGGING PROCEDURE

Similar presentations


Presentation on theme: "EX.NO:3 AIRCRAFT RIGGING PROCEDURE"— Presentation transcript:

1 EX.NO:3 AIRCRAFT RIGGING PROCEDURE
PRESENTED BY MAGESH KUMAR M AP/AERO

2 Aircraft Rigging Aircraft rigging involves the adjustment and travel of movable flight controls which are attached to aircraft major surfaces, such as wings and vertical and horizontal stabilizers. Ailerons are attached to the wings, elevators are attached to the horizontal stabilizer, and the rudder is attached to the vertical stabilizer. Rigging involves setting cable tension, adjusting travel limits of flight controls, and setting travel stops. In addition to the flight controls, rigging is also performed on various components to include engine controls, flight deck controls, and retractable landing gear component parts. Rigging also includes the safe tying of the attaching hardware using various types of cotter pins, locknuts, or safety wire.

3 Aircraft Rigging SPECIFICATION
TCDS FAA MAINTENANCE MANUAL SRM Manufacturer’s Service Information

4 Airplane Assembly Aileron Installation Flap Installation
Empennage Installation

5 Cable System Installation

6 Cable Guides

7 Cable Tension

8 Rigging Fixtures Tension Regulators Turnbuckles Cable Connectors

9 Push Rods (Control Rods)
Torque Tubes Cable Drums

10 Checking Dihedra

11 Checking Incidence

12 Checking Fin Verticality

13 Checking Engine Alignment

14 Cable Tension

15 Control Surface Travel

16


Download ppt "EX.NO:3 AIRCRAFT RIGGING PROCEDURE"

Similar presentations


Ads by Google