Presentation is loading. Please wait.

Presentation is loading. Please wait.

Functions and Signal Generators

Similar presentations


Presentation on theme: "Functions and Signal Generators"— Presentation transcript:

1 Functions and Signal Generators
EE205 – Term Project [121] Name ID KHALED AL-FIFI ABDULBARI DAHLAWI ASIM BOJAN Instructor DR.SAMIR AL-GHADHBAN

2 Outline: I. Signal Generator A. Definition B. Usage C. Type of signal generator II. Function Generator A. Function generator controls C. Specifications III. How to build a function generator A. Circuit in general B. Sin Wave C. Triangular Wave D. Square Wave

3 What is Signal Generator?
Is electronic device that generate repeating or non-repeating electronic signals They are generally used in designing, testing, troubleshooting, and repairing electronic devices

4 There are many different types of signal generators, with different purposes and applications
I. Function generators II. Analog signal generators III. Vector signal generators

5 Function Generator Definition:
Is usually a piece of electronic test equipment or software used to generate different types of electrical Waveform over a wide range of frequencies. Some of the most common waveforms produced by the function generator are: The sine, square, triangular and sawtooth shapes.

6 Function generator controls
Frequency: this control alters the basic frequency at which the waveform repeats. Waveform type: sine, Square or Triangular wave. DC offset: This alters the average voltage of a signal relative to 0V or ground. Duty cycle: This control on the function generator changes the ratio of high voltage to low voltage time in a square wave signal

7 Usages Of Function Generator:
Function generators are used in the development, test and repair of electronic equipment. Example: They may be used as a signal source to test amplifiers or to introduce an error signal into a control loop

8 Function Generator Specifications:
Produces sine, square, triangular, sawtooth (ramp), and pulse output. It can generate a wide range of frequencies. AM or FM modulation may be supported. Output amplitude up to 10V peak to peak. An output impedance of 50 ohms. Note: These are some of the specifications there are other specifications due to the number of different types available ranging from analogue to digital, and according to their cost.

9 How To Build a Function Generator
Circuit in general Sin wave Triangle wave Square wave

10 Circuit in general

11 Note: These were taken from a program that we will use when presenting the presentation. [

12 Reference Function generator: Definition. (n.d.). Retrieved from simple-function-generator.png


Download ppt "Functions and Signal Generators"

Similar presentations


Ads by Google