1. TESTING SERVICES DEPARTMENT SIRIM QAS INTERNATIONAL SDN BHD
TESTING OF
PERSONAL PROTECTIVE EQUIPMENT (PPE)
TESTING SERVICES DEPARTMENT SIRIM QAS INTERNATIONAL SDN BHD
MUHAMMAD TASHRIFF SHAH BIN HELMY SYAMZA
MECHANICAL & AUTOMOTIVE SECTION (MAST)
28 January 2020

2. SIRIM Complex, Shah Alam
50 acres site
SIRIM QAS :
12 buildings
Federal Highway
Block 9, 11, 12, 13, 14, 16, 21, 22
Testing Labs
Block 4, 8, 24B & 25
SIRIM Complex, Shah Alam

3. ABOUT US
Established in 1996 as a wholly-owned subsidiary of SIRIM Berhad.
SIRIM BERHAD is a wholly-owned company of the Malaysian Government under the Ministry of Finance Incorporated.
Have been providing conformity assessment services since the 1970s when these services were provided as a division of SIRIM.
Malaysian based, international accreditation and recognition for Quality Management System, Product Certification and Testing Services.
Local and international clients in countries such as P.R. China, Thailand, Singapore, Brunei, Indonesia, Vietnam, Myanmar, Korea, Philippines, Taiwan, Japan, India, Sri Lanka, Australia, New Zealand, Germany, UAE and Spain.

4. OUR SERVICES CERTIFICATION Management System Certification
Product Certification
Personnel Certification
TESTING
Product compliance testing to standards, regulatory requirements and specifications
INSPECTION
Engineering Inspection
Inspection on behalf of other CBs
Other 3rd party inspections

5. PRODUCT TESTING SERVICES
TESTING SERVICES DEPARTMENT

6. TESTING SERVICES DEPARTMENT
Civil & Construction
Mechanical & Automotive
Chemical & Consumer Products
Material Integrity
Electrical & Electronics
Radio Frequency & EMC
Plastics & Composite Materials
Fire Protection

7. MECHANICAL & AUTOMOTIVE SECTION
MAST
AVCL
Automotive & Vehicle Component Lab
HPPE
Helmet & Personal Protective
Equipment Lab
MIPL
Mechanical & Industrial Product Lab
FGAL
Flow & Gas Appliance Lab
PUIL
Packaging, UN & ISTA Lab

9. HELMET & PPE
HELMET & PERSONAL PROTECTIVE EQUIPMENT LABORATORY

10. PERSONAL PROTECTIVE EQUIPMENTS
BREATHING
PROTECTION
HEAD
HEAR
BODY
FOOT
HAND
EYE

11. PERSONAL PROTECTIVE EQUIPMENTS
INDUSTRIAL SAFETY HELMET
MS 183:2001
BS EN 397:1995
Head Protection
SAFETY FOOTWEAR
MS ISO 20345:2008
Foot Protection
BODY HARNESS & ACCESORIES
BS EN 361
Body Protection
RESPIRATORY
BS EN 140
BS EN 14387
Breathing Protection

12. PERSONAL PROTECTIVE EQUIPMENTS
MS 1953
MS 2050
EN 166
Eye Protection
BS EN 374
BS EN 388
BS EN 420
Hand Protection
BS EN 352
Hearing Protection

13. TEST LOCATION
SIRIM
IN HOUSE TEST
TEST AT
FACTORY
3rd PARTY LAB

14. SIRIM IN HOUSE TEST MS ISO 20345:2008 SAFETY FOOTWEAR MS 183:2001
EN 397:1995
INDUSTRIAL SAFETY HELMET

15. TEST AT FACTORY FALL PROTECTION DEVICES
BS EN 353-2, BS EN 354, BS EN 355, BS EN 358, BS EN 360, BS EN 361, BS EN 362, BS EN 795 and BS EN 813
FALL PROTECTION DEVICES
BS EN 140 and BS EN 14387
RESPIRATORY PROTECTIVE DEVICES

16. STANDARD Test Parameters Product requirements Minimum/Maximum Value
Tolerance Value
Example: MS ISO 20345:2008 – Personal Protective Equipment – Safety Footwear
STANDARD SPECIFICATIONS
Equipment
Test Conditions
Test Methodology
Test Results
Reporting (unit, parameters, test conditions)
Example: MS ISO 20344: Personal Protective Equipment – Test methods for footwear
STANDARD TEST METHOD

17. INDUSTRIAL SAFETY HELMET
Clause 5 Performance Requirements
Clause Shock absorption
Clause Resistance to penetration
Clause Flame resistance
Clause Chin strap anchorages
Clause Stiffness test
MS 183:2001 & EN 395:1995

18. SAFETY FOOTWEAR Design : 2 clauses Whole footwear : 9 clauses
Upper : 9 clauses
Vamp Lining : 5 clauses
Quarter Lining : 5 clauses
Tongue : 3 clauses
Insole & Insock : 6 clauses
Outsole : 7 clauses
MS ISO 20345:2008

19. PARTS OF FOOTWEAR

20. DESIGN

21. CONSTRUCTION

22. WHOLE FOOTWEAR Clause 5.3.1.1 Construction
Clause Upper/outsole bond strength
Clause Specific ergonomic features

23. UPPER Clause 5.4.3 Tear strength Clause 5.4.4 Tensile properties
Clause Water vapour permeability and coefficient
Clause pH value
Clause Chromium VI content

24. LINING Clause 5.5.1 Tear strength Clause 5.5.2 Abrasion resistance
Clause Water vapour permeability and coefficient

25. INSOLE AND INSOCK Clause 5.7.1 Thickness of insole
Clause Water absorption and desorption (insole)
Clause Abrasion resistance of insoles
Clause Abrasion resistance of insocks

26. OUTSOLE Clause 5.8.1 Thickness of non-cleated outsoles
Clause Tear strength
Clause Abrasion resistance
Clause Flexing resistance
Clause Hydrolysis
Clause Interlayer bond strength
Clause Resistance to fuel oil

27. TEST EQUIPMENTS Universal Tensile Machine (UTM) Stiffness Test
Temperature & Humidity Chamber
Compression Test
Tensile Test
Abrasion Test
Tear Strength Test
Flexing Test
Upper/outsole Bond Strength Test
Water Absorption & Desorption Test
Interlayer Bond Strength
Retention System Strength Test
Flame Resistance Test
Impact Test for Toe Cap of Safety Footwear
Corrosion Test
Impact Test for Safety Helmet
Artificial Ageing Test
Penetration Test
pH Test

28. MOTORCYCLE HELMET & VISOR
MS 1:1996
MS 1-1:2011
UN ECE Regulation 22
MOTORCYCLE HELMET
MS 1065:2001
MS 1-2:2011
VISOR

29. OCCUPATIONAL FOOTWEAR
Design : 2 clauses
Whole footwear : 3 clauses
Upper : 9 clauses
Vamp Lining : 5 clauses
Quarter Lining : 5 clauses
Tongue : 3 clauses
Insole & Insock : 6 clauses
Outsole : 7 clauses
BS EN ISO 20347:2008

30. OTHER PRODUCT TESTING BS EN ISO 20347 Sports Footwear
Anti Riot Shield
BS EN ISO 20347
Occupational Footwear
Combat Boot
Anti Riot Helmet

31. PHOTOMETRY TEST

32. OTHER TEST Photometry Vibration Test Retro reflective
Acceleration Weathering Test
Mechanical Reliability Test
Impact Test
Environmental Test
Energy Attenuation Test
Packaging Test
Dust & IP Test
Gas product
Salt spray Test
Flow product
Vehicle Component Test

33. ACCREDITATION AND RECOGNITION BY THE AUTHORITIES
MOTORCYLCE HELMET,
ELECTRIC BIKE,
ELECTRIC MOTORCYCLE,
HEAD LAMP
HPPE & AVCL LAB, MAST
PERSONAL PROTECTIVE EQUIPMENT (PPE),
HPPE LAB, MAST
GAS REGULATOR & WATER PRODUCT
FGA LAB, MAST
PACKAGING
PUI LAB, MAST
AVIATION LIGHT
AVC LAB, MAST
MECHANICAL & AUTOMOTIVE SECTION, MAST

34. THANK YOU CONTACT cserviceqas@sirim.my Tel: +603-5544 6400
Tel:
Tel:
THANK YOU