Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 2 Fibrous structure, roughness, and softness of SNE surface enabling switchable adhesion. Fibrous structure, roughness, and softness of SNE surface.

Published byΠαμφιλος Βιτάλη Modified over 4 years ago

Similar presentations

Presentation on theme: "Fig. 2 Fibrous structure, roughness, and softness of SNE surface enabling switchable adhesion. Fibrous structure, roughness, and softness of SNE surface."— Presentation transcript:

1 Fig. 2 Fibrous structure, roughness, and softness of SNE surface enabling switchable adhesion.
Fibrous structure, roughness, and softness of SNE surface enabling switchable adhesion. (A) An SEM image of SNE showing the top entangled surface and vertically aligned fibers underneath. (B) Schematics showing structural behavior of the top surface when a microsphere is compressed and retracted (left) and showing the van der Waals force that scales with few contacting nanofibers and electrostatic attraction that scales with all the nanofibers on the SNE surface (right). (C) AFM images of the top SNE surface composed of entangled Al2O3-coated CNT fibers. The root mean square roughness within the 100-μm2 area is ~35 nm. (D) Load displacement of Al2O3-coated surfaces with and without SNE, measured by nanoindentation using a ~10-μm-diameter sapphire tip. (E) Pull-off forces of Al2O3-coated surfaces with and without SNE measured by AFM using the ~4-μm-diameter Pt-coated spherical tip. (F) Attractive pressure at distances from the Al2O3-CNT SNE surface measured using the 1.2 mm by 1.2 mm Au-coated flat tip. Sanha Kim et al. Sci Adv 2019;5:eaax4790 Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

Download ppt "Fig. 2 Fibrous structure, roughness, and softness of SNE surface enabling switchable adhesion. Fibrous structure, roughness, and softness of SNE surface."

Similar presentations

Fig. 5 MicroLED array with 3D liquid metal interconnects.

Fig. 5 MicroLED array with 3D liquid metal interconnects.
Fig. 2 Transport properties of a BP transistor at low temperature.

Fig. 2 Transport properties of a BP transistor at low temperature.
Fig. 2 Reconfiguration of liquid metals into 3D structures.

Fig. 2 Reconfiguration of liquid metals into 3D structures.
Fig. 1 Characterization of the device structure.

Fig. 1 Characterization of the device structure.
Fig. 1 High-resolution printing of liquid metals.

Fig. 1 High-resolution printing of liquid metals.
Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.

Fig. 3 The electrical contact of direct-printed and reconfigured liquid metals. The electrical contact of direct-printed and reconfigured liquid metals.
Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,

Fig. 2 Global production, use, and fate of polymer resins, synthetic fibers, and additives (1950 to 2015; in million metric tons). Global production, use,
Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.

Fig. 2 CFD results. CFD results. Results of CFD simulations in horizontal (left column) and vertical (right column) cross-sections. All models oriented.
Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.

Fig. 1 Precursor suspensions for spin coating and the obtained monolayer films. Precursor suspensions for spin coating and the obtained monolayer films.
Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.

Fig. 5 Thermal conductivity of n-type ZrCoBi-based half-Heuslers.
Fig. 1 Map of water stress and shale plays.

Fig. 1 Map of water stress and shale plays.
Fig. 1 Examples of experimental stimuli and behavioral performance.

Fig. 1 Examples of experimental stimuli and behavioral performance.
Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.

Fig. 4 Resynthesized complex boronic acid derivatives based on different scaffolds on a millimole scale and corresponding yields. Resynthesized complex.
Fig. 6 Comparison of properties of water models.

Fig. 6 Comparison of properties of water models.
Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.

Fig. 1 Mean and median RCR (Relative Citation Ratio) of Roadmap Epigenomics Program research articles for each year. Mean and median RCR (Relative Citation.
Fig. 2 Reference-fixing experiment, results.

Fig. 2 Reference-fixing experiment, results.
Fig. 3 Swarm material properties.

Fig. 3 Swarm material properties.
Fig. 3 Scan rate effects on the layer edge current.

Fig. 3 Scan rate effects on the layer edge current.
Fig. 3 Rotation experiment, setup.

Fig. 3 Rotation experiment, setup.
Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Fig. 1 Product lifetime distributions for the eight industrial use sectors plotted as log-normal probability distribution functions (PDF). Product lifetime.

Similar presentations

Ads by Google