1. June, 2010
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [OFDM PHY Mode Representation]
Date Submitted: [ 29 June, 2010]
Source: [J.L.Taylor], Company [DTC (UK)], Address [UK],
Re: [LB51 Comment Resolution]
Abstract: [This contribution proposes a representation for OFDM PHY Modes]
Purpose: [OFDM comment resolution]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Larry Taylor, DTC (UK)

2. OFDM PHY Mode Representation
June, 2010
OFDM PHY Mode Representation
Comments
494 et al
Larry Taylor, DTC (UK)

3. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
June, 2010
Modify Figure 22a
Split Page 7 row in figure 22a into PHY type specific formats
Bits
Bits:26..22
Bits:21..20
Bits:19..16
Bits: 15..0 …
Page 7
Frequency Band
Modulation Scheme = MR-FSK
Reserved
Bit map, where each bit corresponds to a particular PHY mode
Modulation Scheme = OFDM
Bits: 19..9
Bit: 8..5
(Integer)
MCS Value
(Range 0..8)
Bit: 4..0
(Bit Map)
OFDM Options Supported
(for MCS Value)
Modulation Scheme = MR-O-QPSK
To be defined by MR-O-QPSK if different from MR-FSK otherwise not needed
Larry Taylor, DTC (UK)
<author>, <company>