1. New page for summary of test status

2. Dry Run week 19 Pulse injection kickers in point 2
BIS arming and frequency control (linking, starting) through sequencer
Trigger BPMs with pre-pulses
Prepulse coming 900 ms too late
New LHC mastership scheme
New mastership scheme: can become master on spare (remove user request)
Logging of transfer lines
Independent of user and extraction time (for PCs)
Solution for power converter logging will be tested next dry run

3. FGCs – operational settings
Slides by Alick

4. “Dry run” week 21 - cancelled
Extract to TT40 and TT60
Check mastership: extract under LHC master, re-phasing, check pre-pulse
Verify that cannot have any dynamic destination when under injection test mode
Pulse MKIs (new softstart for MKI 8?)
postponed to next week
Run collimators through sequencer this week

5. Dry run week 22 BLM online-check Transfer line logging: new PC logging
BPM triggered by pre-pulses
BCTs – SMP?
Test RF power:
Sequencer tasks, status fixed display, application
Trim + incoorporate
26th of May: RBAC dry run:
Mode: operational/ non-operational
PIQUET role

6. Dry run VI June > week 23
RF low level:
All tasks:
Load actual settings: gains, voltages, frequencies
Load gains, voltages, frequencies
Reset F-rev [before first injection]
Re-phase [before collisions]
All applications ready and settings for operational hyper-cycle available:
RF low level application: status of loops, plus possibility to switch loops
Injection signals fixed displays available
Follow-up issues

7. Dry run week 26 MKQA AC-Dipole Transverse feedback Follow-up issues
All applications: tune, multiturn
Timing events
Interlocking tests (keys,...)
Transverse feedback
Application
Cleaning
Sequencer task
Follow-up issues