1. New Medical Facility Building
By: Vincent Cannatella and Shelbi Remy
Advisor: Edward Rode
Instructor: Cris Koutsougeras
ET Senior Design II

2. introduction
Our senior project involved completing the development of a theoretical medical building.
We have completed the working drawings using AutoCAD.
Completed a project schedule using Primavera software.
Determined the building and fire codes.
Determined the site location.
Conducted an elevation survey of the site.
Made a quantity take-off, also known as an estimate.

3. Working Drawings

4. WORKING DRAWINGS

5. WORKING DRAWINGS

6. Working drawings

7. Working drawings

8. Working drawings

9. WORKING DRAWINGS

10. Exterior finishes Roof Wall Finish Trim Pieces “S” tile roof
Stucco (Decorative wall finish)
Owner will select color
Trim Pieces
2x8 Fascia
2x2 Window Trim

11. Project schedule
We used the Primavera software in order to create a bar chart.
It is basically a flowchart of each task needed to complete this building.

12. Building codes
The building codes come from the Hammond Zoning Ordinance booklet.
Part 1: Principles and Objectives
Section Commercial
1.306
Part 3: Schedule of District Regulations Adopted
Section 3.8 – C-1 Commercial District
3.805
3.806
3.807
Part 5: Off-Street Parking and Loading Requirements
Section 5.3 – Commercial
5.301
Section 5.6 – Off-Street Loading Requirements
5.601

13. Fire codes
The fire codes came from the NFPA 101 Life Safety Code booklet.
Chapter 26: New Building Occupancies
Section 26-1: General Requirements
26-1.7
Section 26-2: Means of Egress Requirements
26-2.4
26-2.6
26-2.8
Section 26-3: Protection
26-3.5

14. Location The location is on Professional Plaza
Near downtown Hammond and I-12 interstate
Two adjacent lots
0.5 acres for $99,000
0.75 acres for $125,000
Total lot size and price
1.25 acres
$224,000

15. Elevation survey of location
A survey was taken of the location using elevation points.
These points are on a 40’ grid pattern across the whole property.

16. Building materials Estimate
Preliminary estimate cost: $261, $297,250
$110 - $125 per square foot
Actual Estimate: $284,460.87

17. Building materials Estimate

18. Timeline/Deliverables
Week 1-2
1/20/15 – 2/3/15
Determine a project and the tasks involved
Week 3-4
2/4/15 – 2/18/15
Determine a site location and cost of the property
Week 5
2/19/15 – 2/26/15
Specify the building codes
Week 6
2/27/15 – 3/6/15
Specify the fire codes
Week 7
3/7/15 – 3/14/15
Work on preliminary drawings; floor plan and elevation plans
Week 8
3/15/15 – 3/22/15
Work on proposal document and presentation
Week 9-13
3/23/15 – 4/27/15
Begin estimation for materials
Week 14-15
4/28/15 – 5/8/15
Prepare final document and presentation
Last Semester
This Semester
Week 1
8/24/15 – 8/28/15
Discussed what we did last semester and what is expected for this semester
Week 2-3
8/31/15 – 9/11/15
Work on proposal document and presentation
Week 4
9/14/15 – 9/18/15
Revise preliminary drawings and begin working on the working drawings
Week 5
9/21/15 – 9/25/15
Finalize working drawings using AutoCAD
Week 6-8
9/28/15 – 10/16/15
Begin estimation for materials
Week 9
10/19/15 – 10/23/15
Finalize quantity take-off
Weeks 10-12
10/26/15 – 11/13/15
Begin project schedule using Primavera
Weeks 13-14
11/16/15 – 11/27/15
Begin elevation survey
Week 15
11/30/15 – 12/4/15
Prepare final document and presentation

19. ANY QUESTIONS?