1. doc.: IEEE 802.15-<15-09-0758-00-004e>
<month year>
doc.: IEEE < e>
<January 2019>
Project: IEEE P Working Group for Wireless Specialty Networks (WSNs)
Submission Title: [TG4z EiR Closing Report]
Date Submitted: [17 March 2019]
Source: [Tim Harrington] Company [Pro-ID]
Address [Los Gatos, CA]
Voice:[ ],
Re: [TG4z EIR Closing Report for March 2019 plenary session]
Abstract: [IEEE TG4z EIR Closing Report for March 2019 interim session]
Purpose: [IEEE TG4z EIR Closing Report for March 2019 interim session]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Tim Harrington (Pro-ID)

2. IEEE 802.15.4z EiR Closing report
March 2019>
IEEE z EiR Closing report
March 14, 2019
Tim Harrington
IEEE TG4z EiR Chair
Tim Harrington (Pro-ID)

3. Accomplishments Comment Resolution of informal ballot
<March 2019>
Accomplishments
Comment Resolution of informal ballot
387 Comments resolved
Drafted and approved CAD
Tim Harrington (Pro-ID)

4. <March 2019>
Motion
Move that WG approve the formation of a Comment Resolution Group (CRG) for the WG balloting of the P z_D00 with the following membership:
Tim Harrington (Chair), Ayman Naguib, Seongah Jeong, Aditya Padaki, Billy Verso, Frank Leong, Ben Rolfe, David Barras, Daniel Knobloch, Jochen Hammerschmidt, Boris Danev, Brima Ibrahim, Peter Sauer and Jarek Niewczas.
The z CRG is authorized to approve comment resolutions, edit the draft according to the comment resolutions, and conditionally approve start of the initial Working Group ballot of the revised draft on behalf of the WG. Comment resolution on the ballots between sessions will be conducted via reflector and via teleconferences announced to the reflector as per the LMSC 802 WG P&P.
Moved by: Tim Harrington Seconded by:
Tim Harrington (Pro-ID)

5. <March 2019>
Motion
Move that WG start a WG Letter Ballot requesting approval of CA document [ z with editorial corretions as needed by the CAD technical editor] and document P z_D06a (as edited in accordance with the instructions in document z) and to forward document P z_D06a, as edited in accordance with the instructions in document z, and CA document [ z with editorial corretions as needed by the CAD technical editor] to Standards Association ballot pending the completion and inclusion of the edits in the draft.
Moved by: Tim Harrington Seconded By:
Tim Harrington (Pro-ID)

6. Jul 12, 2010
07/12/10
<March 2019>
Timeline
March 2018 – 2nd Call for proposals – resolved comments on PAR and CSD
July 2018 – Review new proposals – Merge Baselines for draft
September 2018 – Drafting using merged baselines
November 2018 – Drafting using merged baselines
January 2019 – Send Draft to TEG
March 2019 – TEG Comment Resolution - Initiate WG Letter Ballot
May 2019 – Comment Resolution – Working Group Recirculation
July 2019 –Request Approval to proceed to Standards Association Ballot
September Comment Resolution – Recirculation
November 2019 – Comment Resolution - Request to Forward to RevCom
Tim Harrington (Pro-ID)
Page 6

7. Agenda for May Interim Scheduled for 10 Time Slots
Jul 12, 2010
07/12/10
<March 2019>
Agenda for May Interim
Scheduled for 10 Time Slots
Comment Resolution for TEG Comments
Comment Resolution for Workgroup Ballot
Comment resolution for CA Document
Start Recirculation of Draft Standard and CAD
Tim Harrington (Pro-ID)
Page 7