1. Mechanics
Topic 2.1 Kinematics

2. Kinematic Concepts 2.1.1 Define Displacement
Is a measured distance in a given direction
It tells us not only the distance of the object from a particular reference point but also the direction from that reference point
It is a vector quantity
In many situations it is measured from the origin of a Cartesian co-ordinate system

3. Kinematic Concepts 2.1.1 Define Speed
Is the rate of change of distance
Or the distance covered per unit time
Speed is the total distance (d) covered in total time (t)
Speed (s) = total distance (d) total time (t)

4. Kinematic Concepts 2.1.1 Define Velocity
Is the rate of change of displacement
Is a measured speed in a given direction
It tells us not only the speed of the object but also the direction
It is a vector quantity

5. Average Velocity
Defined as the total displacement (s) of the object in the total time (t)
Velocity (vav) = total displacement (s) total time (t)
vav = s t
Where  indicates a small change in the value

6. Is the velocity at any one instant v = s t
Instantaneous Velocity Explain the difference between Instantaneous and average values of speed, velocity and acceleration
Is the velocity at any one instant
v = s t
Where t is tending towards zero

7. Kinematic Concepts 2.1.1 Define Acceleration
Is the rate of change of velocity in a given direction
a = v / t (where v = v – u)
It is a vector quantity
If the acceleration of an object is positive then we understand its rate of change of velocity to be positive and it could mean that its speed is increasing
Do not think of acceleration as a ´slowing up´or a ´getting faster´.

8. 2. Displacement-time graphs 3. Velocity-time graphs
Graphical Representation of Motion Draw and Analyze distance-time graphs, d/t graphs,v/t graphs, a/t graphs
These come in 4 forms
1. Distance-time graphs
2. Displacement-time graphs
3. Velocity-time graphs
4. Acceleration-time graphs

9. Gradiants of Graphs Calculate and interpret the slopes of d/t, v/t graphs and the areas under v/t, a/t graphs
Gradiant of a Displacement-time graph is the velocity (instantaneous or average?)
Gradiant of a Velocity-time graph is the acceleration (instantaneous or average?)

10. Areas Under Graphs
Area under a Velocity-time graph is the displacement
Area under a Acceleration-time graph is the velocity
Areas can be calculated by the addition of geometric shapes

11. Velocity and hence Acceleration can be measured using
Uniformly Accelerated Motion Outline the conditions under which equations for uniformly accelerated motion may be applied.
Velocity and hence Acceleration can be measured using
Light gates
Strobe photographs ( Duncan Page 142/3)
Ticker tape timers

12. The Equations of Uniformly Accelerated Motion
There are 4 equations which we use when dealing with constant acceleration problems
I call them the “suvat” equations
You need to be able to derive them

13. The 4 Equations
Supposing the velocity of a body increases from u to v in time t, then the uniform acceleration, a is given by
a = change of velocity time taken
a = v – u t
 v = u + at - equation (1)

14. Since the velocity is increasing steadily, the average velocity is the mean of the initial and final velocities, i.e.
Average velocity = u + v
If s is the displacement of the body in time t, then since average velocity = displacement/time = s/t
We can say s = u + v t
 s = ½ (u + v) t - equation (2)

15. But v = u + at
 s = ½ (u + u + at) t
 s = ut + ½at2 - equation (3)

16. If we eliminate t from (3) by substituting in t = (v – u)/a from (1), we get on simplifying
v2 = u2 +2as - equation (4)
Knowing any three of s, u, v, a, t, and the others can be found

17. Acceleration Due to Gravity 2. 1
Acceleration Due to Gravity Identify the acceleration of a body falling in a vacuum near the Earth’s surface with the acceleration g of free fall
Experiments show that at a particular place all bodies falling freely under gravity, in a vacuum or where air resistance is negligible, have the same constant acceleration irrespective of their masses.
This acceleration towards the surface of the Earth, known as the acceleration due to gravity, is donated by g.

18. Its magnitude varies slightly from place to place on the Earth´s surface and is approximately 9.8ms-2

19. Air resistance depends on 2 things
The Effects of Air Resistance Describe the effects of air resistance on falling objects
Air resistance depends on 2 things
Surface area
Velocity
Air resistance increases as surface area increases
Air resistance increases as the velocity increases

20. Terminal Velocity
As an object falls through the air, it accelerates, due to the force of attraction of the Earth. This force does not change.
As the velocity increases, the air resistance, the force opposing the motion, increases, therefore the acceleration decreases.

21. If the object falls for long enough, then the air resistance (a force acting upwards) will equal the force of attraction of the Earth (the weight) (a force acting downwards)
Now there are no net forces acting on the object (since the two forces balance) so it no longer accelerates, but travels at a constant velocity called its terminal velocity.

22. Terminal velocity depends on
The size
Shape
And weight of the object
A sky diver has a terminal velocity of more than 50ms-1 (100 miles per hour)

23. Relative Motion 2.1.9 Determine relative velocity in one and two dimensions
If you are stationary and watching things come towards you or away from you, then your stating velocities is easy.
If, however you are in motion, either moving towards or away from an object in motion, then your frame of reference is different

24. Example problems in classwork
2.1.5 Solve Problems involving the equations of uniformly accelerated motion
Example problems in classwork

25. In this case the relative velocity is the velocity of the object relative to your motion.
Examples include
cars overtaking
Trains going passed platforms