1. Injection mold specification
Client
FUJIXEROX
Model Name
FUJIXEROX(KAMUY)
Part Name
COVER_REAR
Part No.
802B86510
DFM
Feitai Zhong

2. Integral Corrective Action List
ICAL
Page
OPEN POINTS
SOLUTIONS/ACTION
WHO 1 2 3 4
Plastic flow analysis
Please confirm?
Gas Assist Point 5
Parting _ line 6 7
Undercut & sharp steel 8
Sharp steel
Reduce plastic? 9
Undercut
Add plastic? 10
Having no draft
Please put the draft?
I C A L
Integral Corrective Action List
1-Date of opening (all dates in2005)
2-Date of beginning of action
3-Date foreseen for validation
4-Date of validation (closing)
DFME Follow-up issue

3. Plastic Flow Analysis 1 1 2 3
Gate
Weld lines 3 2

4. Gas Assist Point
Gas Assist Point

5. Parting _ line
Cavity
Core
Texturing area
2deg

6. Parting _ line
Cavity
Core
2deg

7. Modify 01_A A A B B
Please see the details in the next two pages.

8. Reduce plastics in the grid area Add plastics in the grid area
Modify 01_B
Proposal 2
Proposal 1
Reduce plastics in the grid area
Add plastics in the grid area
Original P/L
Sharp steel

9. Modify 01_C
Original
Changed
Add plastic
Undercut

10. Modify 02
All of the green surfaces are no draft, Please update the 3D data, otherwise, We will be
reduce plastics reference by mould release demand, OK?