1. Button timers - cream 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

2. Button timers - yellow 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

3. Button timers - green 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

4. Button timers - blue 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

5. Button timers - red 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

6. Button timers - white 41 39 42 44 45 38 43 36 32 31 33 34 46 35 37 47 56 55 57 58 60 59 54 53 49 48 50 51 52 30 40 9 8 10 11 13 12 7 6 1
End 2 3 29 4 14 5 24 23 26 27 28 15 22 25 16 21 17 18 19 20 33 30 29 32 26 24 34 25 27 28 42 43 44 45 23 41 40 36 37 38 39 35 31 6 7 8 9 5 3 22
End 1 2 10 4 19 20 11 21 17 18 13 12 14 15 16 21 20 19 17 22 16 18 29 30 15 27 26 24 25 23 28 4 5 3 1 14
End 6 2 7 13 12 11 9 10 8 14 13 12 15 11 19 10 20 18 17 16 3 2 9
End 4 1 5 7 8 6 10 9 11 14 15 13 12 8 2
End 7 3 1 6 4 5 7 8 10 6 9 1
End 2 3 5 4
Button timers countdown in 1 second increments – above are 6 different timers for 60secs, 45secs, 30secs, 20secs, 15secs, 10 secs. Each timer is constructed from a series of shapes piled on top of each other, and animated to disappear at 1 seconds intervals.
To copy a timer, select the entire pile of shapes by clicking and holding the left mouse button whilst drawing a rectangle that completely encapsulates the timer.
Note – it is possible to have multiple timers (possibly of different colours) on the same slide as each works independently of others.

7. 1 minute bar timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

8. End 1 minute sand timer 1 minute
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

9. 1 minute full circle timers
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

10. Digital clock timers
0:39
0:38
0:40
0:42
0:43
0:37
0:41
0:35
0:31
0:30
0:32
0:33
0:44
0:34
0:36
0:45
0:54
0:53
0:55
0:56
0:58
0:57
0:52
0:51
0:47
0:46
0:48
0:49
0:50
0:29
0:28
0:07
0:06
0:08
0:09
0:11
0:10
0:05
0:04
End
2:00
0:01
0:02
0:03
0:12
0:13
0:23
0:22
0:24
0:25
0:27
0:26
0:21
0:20
0:16
0:15
0:17
0:18
0:19
0:59
0:14
1:41
1:40
1:42
1:43
1:45
1:44
1:39
1:38
1:33
1:32
1:34
1:35
1:37
1:36
1:46
1:47
1:56
1:55
1:57
1:58
1:00
1:59
1:54
1:53
1:49
1:48
1:50
1:51
1:52
1:31
2:00
1:10
1:09
1:11
1:12
1:14
1:13
1:08
1:07
1:30
1:01
1:02
1:03
1:05
1:04
1:15
1:06
1:26
1:24
1:27
1:16
1:28
1:29
1:23
1:25
1:19
1:22
1:18
1:17
1:20
1:21
0:57
1:25
0:58
0:59
1:28
1:26
0:56
1:27
1:29
1:30
0:49
0:47
0:46
1:24
0:45
0:48
0:50
0:54
0:53
0:52
0:51
0:55
1:09
1:07
1:08
0:44
1:10
1:06
1:05
1:01
1:02
1:03
1:04
1:11
1:12
1:19
1:20
1:21
1:22
1:18
1:17
1:13
1:14
1:15
1:16
1:23
0:28
0:12
0:11
0:10
0:09
0:13
0:14
0:18
0:17
0:16
0:15
0:08
0:07
0:01
End
1:30
1:00
0:02
0:03
0:06
0:05
0:04
0:19
0:20
0:36
0:35
0:34
0:33
0:37
0:38
0:42
0:41
0:40
0:39
0:32
0:31
0:24
0:23
0:22
0:21
0:25
0:26
0:30
0:29
0:27
0:43
0:45
0:40
0:39
0:41
0:42
0:44
0:43
0:38
0:37
0:32
0:31
0:33
0:34
0:36
0:35
0:46
0:47
0:56
0:55
0:57
0:58
1:00
0:59
0:54
0:53
0:49
0:48
0:50
0:51
0:52
0:30
0:29
0:09
0:08
0:10
0:11
0:13
0:12
0:07
0:06
0:01
End
0:02
0:03
0:05
0:04
1:00
0:14
0:24
0:23
0:25
0:26
0:28
0:27
0:15
0:22
0:17
0:16
0:21
0:18
0:19
0:20
These digital clock timers countdown from either 2 minutes, 1 min 30secs or 1 minute. The timings of these cannot be easily changed, although the colour can be by simply selecting the entire ‘pile’ of shapes that makes them up, and then formatting the colours.
There is a bell timer at the end of the countdown, if this is not desired then enter the animation settings, and delete the animation that ends .wav from the animation listing.

11. 2 minute bar timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

12. End 2 minute sand timer 2 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

13. 2 minute full circle timers
2 minutes
2 minutes
2 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

14. 3 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

15. End 3 minute sand timer 3 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

16. 3 minute full circle timers
3 minutes
3 minutes
3 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

17. 4 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

18. End 4 minute sand timer 4 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

19. 4 minute full circle timers
4 minutes
4 minutes
4 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

20. 5 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

21. End 5 minute sand timer 5 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

22. 5 minute full circle timers
5 minutes
5 minutes
5 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

23. 10 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

24. End 10 minute sand timer 10 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

25. 10 minute full circle timers
10 minutes
10 minutes
10 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

26. 15 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

27. End 15 minute sand timer 15 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

28. 15 minute full circle timers
15 minutes
15 minutes
15 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.

29. 20 minute timer
This bar timer, will start when anywhere on the slide is clicked. The bar will move from left to right and the word ‘End’ will appear at the end, accompanied by a ‘Deep Gong’ sound. It is possible to change the duration of this timer to any time, by entering the animation settings, and changing the timing for ‘rectangle 3’. Note the time has to be entered as a number of seconds – so if you want 2mins & 30secs – this is entered as 150 (60X = 150).
End

30. End 20 minute sand timer 20 minutes
This ‘sand timer’ will start on a mouse click anywhere on the slide. The ‘sand’ will drain from the top section to the lower section and when completed will show the word ‘End’.
To change the timings of this timer, you need to enter the animation settings, and change the timings for the Isosceles Triangles. There will be 2 that need changing (to the same amount) – one animates the top triangle emptying, whilst the other animates the bottom triangle filling.
When you change the timings these have to entered as a number of seconds.
End

31. 20 minute full circle timers
20 minutes
20 minutes
20 minutes
These timers appear initially as a cream, coloured circle. The timer is initiated by clicking on, at which point the circle will fill up in a clockwise direction with the colour you see above.
At the end of the time, a bell will sound.
It is possible to change the timings of the timers by entering the animation settings and changing the timings of the relevant ‘Oval’. Note the timings have to be entered in seconds.
It is possible to have multiple timers on the same slide as these work independently of each other.