1. The Paint Brush hanger

2. Materials Needed - A paint brush (any type of one/size)
Note: Make sure you buy one
that contains a hole close to
the end so that you could put
the nail through it.
- A nail
- Super Glue (I recommend the Gorilla Super Glue) 
- A hammer 

3. How to put it Together
Step 1: Grab the paint brush and the super glue, then open the super glue from its packaging and open the tip.
Step 2: Then add some glue to the brush of the paint brush and make sure it is sticky and moist.
Step 3: Quickly curve the brush into the shape of a hanger like the picture below.

4. How to put it Together (Cont.)
Step 4: Let it sit on a hard surface and let it dry for a couple of minutes (3-5 Minutes).
Step 5: As soon as it is done, it should be all dried out and stiff/hard, and the next step will be to grab the nail and place it through the hole of the paint brush and find a place of where you want your hanger to be.
Step 6 (Final step): Finally grab the hammer and ham the nail into the wall. After that you are finally finished and now you could hang clothes such as sweaters, jackets, or even hats or etc.

5. Where to I would Market from
I would market my invention to furniture stores or arts and crafts stores such as Michael’s, Office depot, etc. Also I would market this to people that like clothes so that if just in case they run out of clothe hangers they could use the ultimate paint brush hanger that works just like a clothe hanger but in style.

6. Pictures for Finishing touches