1. 3D machining 1 Contents

2. Model import The parts 3D model was imported into the Model folder, fixtures 3D models were imported into the Restrictions folder. Part model Folder containing imported model geometry Import model geometry Folders containing geometry of imported fixtures Fixtures models Contents

3. The workpiece Workpiece transparent view Box around Part The default workpiece is a box, it is built automatically around part. Contents

4. The operation Create new operation menu Roughing waterline Roughing operations group New Roughing waterline operation Contents

5. Roughing waterline Contents

6. Job assignment Model of the part in the Model folder is automatically added as the operations part Geometry model of the part Models of fixtures in the Restrictions folder are automatically added to the restricted area of the operation Geometry models of fixtures Contents

7. Machining parameters Contents

8. Machining strategy Machining is performed by parallel passes Set pass step to 30% of the tool diameter Do not use trochoid Contents

9. Toolpath calculation Toolpath Marks that the calculation is successful Contents

10. Machining simulation Tool Workpiece Инструмент Fixtures Machining result Остаточный материал под прихватами Leftover material under the fixtures Contents

11. Функция создания операции Next operation Create operation menu Finishing operations group Complex Finishing complex Finishing Plane Contents

12. Complex machining Finishing waterline Finishing plane Complex finishing Residual material Minimum residual material Contents

13. Job assignment Par t of the previous operation When new operation is created its part is set to the part of the previous operation by default. In our example the part is assigned for both member operations of the Finishing complex operation. Fixtures restrictions are not applied to this operation. Contents

14. Finishing plane parameters Contents

15. Finishing waterline parameters Contents

16. Toolpath calculation Toolpath Indicates that calculation is succesful Contents

17. Machining simulation Tool Holder Residual material of previous operation Turn off Shade plus Ware and turn on Shade Machining result Contents

18. New operation Create operation menu Roughing operations group 2D contouring New 2D contouring operation Contents

19. Job assignment Curve selection dialog Equidistant contour Job assignment tab Select curve Contents

20. Machining parameters Contents

21. Toolpath calculation Toolpath Indicates that toolpath calculation is successful Contents

22. Machining simulation Residual material of previous machining Tool Machining result Contents

23. Tools list creation Create tool list Tool list dialog View configuration Object visibility panel Document template Contents

24. Tools list List of operations Document template List of tools Machining time Geometry model views Contents

25. Postprocessors NC-program generation Postprocessor file NC-program file name NC-program listing Contents