1. L9 and B6.7 Component ID Change All options - D313029BX03 (B 2017) All options - D563025BX03 (L 2017) Mike Langevin 3/9/2017

2. Project Scope Change Summary: Background:
The model year transmitted by the engine controller in the J1939 Component ID message (PGN 65259, SPN 587) and in the System_Model information via INSITE is being changed from “13” to “17” to indicate the correct engine model year in the <PP1 cal release>
Background:
As OEMs began building vehicles with B, L, and X15 engines, they noticed the model year was being transmitted on the X15 as “17”, while on the B and L it was being transmitted as “13”.
Implementation Strategy and Date:
This will be implemented in the PP1 calibration release going into production 5/31/ OEMs should verify there are no negative system effects with this model year change.

3. Change Summary SPN 587 Byte Previous B PP1 B Previous L PP1 L
Per section and Appendix E of CEB 00510, SPN 587 will change as follows:
SPN 587 Byte
Previous B
PP1 B
Previous L
PP1 L 1 36 2 42 4C 3 20 4 75 5 31 6 33 37 7 44 8 30 9 38 10 39
New Translated Result:
B – “6B u17D067”
L – “6L u17D089”

4. Change Summary Previous B PP1 B Previous L PP1 L
The System_Model (as shown by INSITE) will also change as shown below:
Previous B
PP1 B
Previous L
PP1 L
6B u13D067
6B u17D067
6L u13D089
6L u17D089