1. Your Winlink “Whitelist”
Created by Ed, VE7ED, ver. 1.0

2. Whitelist - Internet
For a Winlink Express user to receive a message, the sender's address must be listed in the recipient's ”whitelist ”
All Winlink accounts except “tactical callsigns” have this feature to purposely block mail from the internet that is not permitted. 
Note: Winlink Whitelist filter can be bypassed, the mail will be delivered even if the sender is NOT on the recipient's whitelist by adding //WL2K at the beginning of the subject line.

3. Whitelist Access VHF / UHF / HF Radio
Winlink Express (client)
VHF/UHF KPC3+ or HF SCS TNC connected to your radio
You must have radio path to a VHF/UHF RMS Packet (server) or HF RMS Trimode (server)
You must have an active Winlink account and password setup.

4. WHITELIST - Commands SYSTEM:
Subject: WHITELIST [In the message body, the following commands are available.]
LIST: [will return a list of all whitelist entries]
(will allow messages from) 
be accepted for delivered.
reject any messages from)
to be rejected for delivered.
your Whitelist).
Note: Accept & Reject commands can have multiple entries at one time
Whitelist address without an will be treated as a "domain".
If "ACCEPT: domain (eg. rac.ca)" then ALL s from that domain will be delivered.

5. Create – Post – Send – Wait – then Retrieve
Creating the request
Create – Post – Send – Wait – then Retrieve

6. Posting your Whitelist request

7. Sending your Whitelist request
Send via RMS or Internet

8. Retrieving your Whitelist
Retrieve via RMS or Internet

9. Your Whitelist

10. Adding to Whitelist Adding a Email to your Whitelist
Adding a domain to your Whitelist

11. Rejecting from Whitelist
Rejecting an address
Reject a domain

12. Delete entry(s) from Whitelist
Delete one or multiple addresses
Delete one or multiple domains

13. Multiple entries
Multiples entries can be done all at the same time. ’s or Domain’s or both Example: Accept: arrl.net Accept: bchydro.com Accept: Reject: Do not use @Yahoo.com etc.

14. Whitelist from the Internet
Go to Login to your Winlink account (password required & it is case sensitive) Choose – My Whitelist To Add a address or domain, Type it on the address line and click “Save” To Edit an address click on the Edit button beside the address. Click on “Edit” on the upper address line and click “Save” To Delete an address, Click on “Delete” beside the address you want to delete. Note: Delete your old addresses

16. Q & A

17. Presentations History Hardware Software Whitelist Precedence
Node Scripts
ComPorts
Diagnostics