1. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Open Comments for FSK PHY]
Date Submitted: [March 1, 2010]
Source: [Kuor Hsin Chang, Monique Brown]
Company: [Elster Solutions, M.B. Brown Consulting]
Address: []
Voice: []
Re: []
Abstract: Summarize open issues for FSK PHY in g-candidate-text-comments.
Purpose: Presented to the g SUN Task Group for review
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
<author>, <company>

2. Outline
Total number of open issues: 67
Open technical issues: 13

3. Open Comments
Recommend to change FSK to GFSK with BT=0.5 for mandatory data rate of 50 kbps. The definition of the mandatory data rate 50 kbps will be unified across all listed ISM bands
Comment 324
Use data rates of 48kbps, 51.2kbps, 56kbps or 57.6kbps instead of 50kbps
Comment 344

4. Open Comments (cont’d)
Capability messages:
Comment 285, 225, 267, 152, 272, 290, 77, 71, and 343:
Mode Switch Mechanism/Packet:
Comments 6, 54, 70, 97, 99, 139, 145, 158, 159, 172, 174, 179, 193, 223, 234, 237, 241, 274, 303, 308, 309:
SFD value:
Comment 23, 93, 94, 95, 96, 136

5. Open Comments (cont’d)
FEC:
Comment 25, 56, 105, 141, 142, 176, 191, 258, 312, 318, 329
Frequency hopping:
Comment 15, 255, 260, 316, 320
For the MRFSK PHY, the Frame Length field shall be formatted with the MSB to be transmitted first:
Comment 7

6. Open Comments (cont’d)
Time stamp in PHY:
Comment 111
A parameter to describe the maximum payload size supported by the given device
Comment 243
TX-to-RX, RX-to-TX turnaround time:
Comment 114, 115, 195, 196

7. Open Comments (cont’d)
Spec. limit:
Comment 341, 342
Coarse precision for the range and resolution of Generic PHY attributes
Comment 104
Editorials:
Comment 125, 133, 338

8. Update in Rev. 14 Withdrawn Resolved
133, 329
Resolved
125
Replaced "400/470/863/902/950/2400" PHY with SUN PHY.
341, 342, 343
Updated draft addressed the commenter’s concern
Change the resolution of the following comments:
119, 121, 122, 132
Add “Delete 869 MHz from Table 1 and Table 1a.” from the resolution detail.
Misc. Update:
Fill in the “Resolution Status” for resolved comments with the “Resolution Status” blank
Delete “Withdraw” from
Delete A or B from column Q

9. Questions?