Presentation is loading. Please wait.

Presentation is loading. Please wait.

Introduction to Computing

Similar presentations


Presentation on theme: "Introduction to Computing"— Presentation transcript:

1 Introduction to Computing
Lecture-05-Starting/ Shutting Down a Computer Muhammad Hafeez Department of Computer Science GC University Lahore

2 Today’s Agenda The Process of Starting up The Process of Shutting Down

3 Start Up/ Boot Cold Booting: Warm Booting:
Start a Computer when it is powered off Warm Booting: Start a computer from Operating System (Restart) Each time system is started the KERNEL is loaded in memory Memory Management CPU Clock management Allocate Resources Start/ Stop Programs KERNEL is memory resident

4 Steps For Booting Step 01: Turn on, power supply send signals to components in system. Step 02: The charge of electricity tells the processor chip to reset itself and find the ROM Chip that contains BIOS (A firmware that contains computers startup instructions)

5 Steps For Booting Step 03: The BIOS performs a series of tests to make sure computer hardware/ Operating system is connected properly. The tests, collectively called POST (power-on self test) Check Buses System Adapter Cards RAM Mouse Keyboard Drives LEDs flicker with POST test

6 Steps For Booting Step 04: POST results are compared with CMOS chip. CMOS is a battery powered chip that stores data about computer configuration. If error is found, the computer responds different for different kind of errors.

7 Steps For Booting Step 05: If POST test is successful, BIOS searches for specific system files on available secondary storage (typical C Drive of HDD) Step 06: After system files are loaded in RAM, the KERNEL of operating system is loaded, OS takes control of the computer. Step 07: OS loads system configuration information in memory.

8 How the System Boot

9 Shutting Down the System
Shutting Down has three options: Power off Sleep Mode Hibernate Mode Sleep Mode: save any open program in RAM, turns off all unneeded functions, turns computer in low-powered mode. If power is removed in sleep mode, all unsaved work is lost.

10 Shutting Down the System
Hibernate Mode: Saves open programs/ unsaved work on hard disk.

11 Questions ??????????????????????????


Download ppt "Introduction to Computing"

Similar presentations


Ads by Google