1. Monday August 4 Course syllabus Lab safety
HW- study for quiz Monday, find an example of a graph to share (Fri), work on Salem witch trial packet (Fri)

2. Tuesday August 5 Measurement Measurement lab
HW- complete measurement drawing with ruler, study for quiz Mon, find graph example to share (Fri), work on Salem witch trial packet (Fri)

3. Wed August 6 Packet on graphing
HW- study for quiz Mon, find graph to share for tomorrow, finish Salem witch trial packet for tomorrow

4. Thurs August 7 Go over graphs in pairs
Go over Salem witch trial packet
HW- study for safety and measurement quiz Mon

5. Magnifying glass
Eye dropper
Scissors
Dissecting tray
Forceps
Dissecting pins
Ruler
Probe
Scalpel

7. Coverslip
Microscope
Slide
Petri Dish

9. Revolving nose piece
High , Med, Low
Stage clips

10. Microscope Usage Always carry with two hands
Has one lens in the eyepiece
Has three revolving objectives at varying magnifications
To find total magnification, multiply the eyepiece (10x) by the objective lens

11. Microscope Usage
Start by placing the slide in the center of the stage.
To find an object, raise the stage and use the lowest objective and the course adjustment.
When you find it, you can increase the objective and use the fine focus.
If you keep the object in the middle of the field of view, you see it each time you increase objectives.
Do not use the coarse focus on the 2nd and 3rd objectives, or the slide may break.
When done, take off the slide, return the objective to the lowest one, lower the stage, and turn off microscope.

12. Lab Safety NO playing around Follow directions Use common sense
Alert me right away if there is any problem