1. Two methods to observe tutorial
Standard Method
This method allows presentation to be resized to user preference.
Slide Show Method (Example below)
Presentation fills entire screen
Click on Slide Show tab at top of screen
Click icon <From Beginning>
Note: Either method; to advance click the progression arrow in the bottom right corner of each slide or press the down-arrow key.

2. Transaction Procedures
Welcome to
BSIP 101
Transaction Procedures
Material Count
Adjustment
Instructor: Stephen Wright DPI Technical Consultant

3. It should not be used to correct for understood issues.
This transaction should only be used for materials to correct for incorrect adjustments or are an acknowledgement that the source of the discrepancy could not be determined.
It should not be used to correct for understood issues.

4. (Without a physical inventory document produced from MI31)
Purpose: To post a physical inventory count immediately.
(Without a physical inventory document produced from MI31)

5. One transaction is required to complete this procedure:
MI10
Let’s get started -

6. Your screen should look similar to the example at the right.
From the SAP R/3 Easy Access screen box type MI10 or
from your favorites menu, select transaction MI10 – Create List of Difference w/o Doc.
Your screen should look similar
to the example at the right.

7. Post Document, Count, and Difference: Initial Screen
A new window opens:
Post Document, Count, and
Difference: Initial Screen
Enter the following:
Count Date – Date physical count taken.
Plant - Enter your four digit plant code (Ex: = Macon).
Storage Loc. – Location where material is stored.
(Ex: = Macon)
Press <Enter> or click Continue icon to progress.

8. Post Document, Count, and
A new window opens:
Post Document, Count, and
Difference: New Items
Enter the following:
Material Description – Nine digit material number.
Quantity - Enter total quantity on hand if greater than zero. If count equals zero ü check the box in the ZC (Zero Count) column.
Click Save icon to record changes.

9. Post Document, Count, and Difference: Initial Screen
A new window opens:
Post Document, Count, and
Difference: Initial Screen
The system will generate a material document number along with the physical inventory document number in the Status bar.
Press <ESC> key or click on the Back icon to return to the main menu.

10. Tip:
Posted changes can be seen using transaction ZMB20 with movement types 701 to 702.

11. Questions

12. Thank You!
Stephen Wright
Technical Consultant