1. Chapter 11
Work and Power

2. Work
In scientific terms, you do work any time you exert a force on an object that causes the object to move some distance.
If the object does not move, no work is done, no matter how much force is exerted.

3. Calculating work
Work = force x distance
Work is measured in joules.

4. Power Power is the rate at which work is done.
Power equals the amount of work done on an object in a unit of time.
SI unit for power is the watt(W)

5. Machines
Machines are devices that allow you to do work in an easier way.
Machines do not reduce the amount of work you do. Instead they just change the way you do work.

6. Making work easier with machines
A machine makes work easier by changing at least one of three factors:
The amount of force you exert
The distance over which you exert your force
The direction in which you exert your force

7. Input vs Output Input- force you exert when you do work
Output- weight of an object over distance

8. Mechanical advantage
Mechanical advantage is the number of times a machine increases a force exerted on it. The ratio of output force to input force is the mechanical advantage of a machine.

9. Inclined Planes and Levers
A simple machine is the most basic device for making work easier.
Three closely related simple machines- the inclined plane, the wedge, and the screw- form the inclined plane family.

10. Inclined Plane An inclined plane is a flat, sloped surface.
Lifting a heavy object such as a motorbike is much easier with a ramp.
An inclined plane allows you to exert your input force over a longer distance.
As a result, the input force needed is less than the output force.

11. wedge
A wedge is a device that is thick at one end and tapers to a thin edge at the other end.
When you use a wedge, instead of moving an object along the inclined plane, you move the inclined plane itself.
An ax is an example of a wedge.

12. The screw
Like a wedge, a screw is a simple machine that is related to the inclined plane. A screw can be thought of as an inclined plane wrapped around a cylinder.
The threads of a screw act like an inclined plane to increase the distance over which you exert the input force.
Examples of screws are bolts, drills, and jar lids.

13. lever
Have you ever ridden on a seesaw or used a spoon to eat your food?
If so, you have used a lever.
A lever is a rigid bar that is free to pivot, or rotate, on a fixed point. The fixed point that a lever pivots around is called the fulcrum.

14. 1st, 2nd, and 3rd class levers

15. Pulley
Two simple machines take advantage of turning : the pulley and the wheel and axle.

16. How a pulley works?
A pulley is a simple machine made of a grooved wheel with a rope or cable wrapped around it. You use a pulley by pulling on one end of the rope. This is the input force. At the other end of the rope, the output force pulls up on the object you want to move. The grooved wheel turns. This makes it easier to move the rope than if it had just been looped over a stick.

17. How a Wheel and axle works?
A simple machine made of two connected objects that rotate about a common axis is called a wheel and axle.
Examples are screwdrivers, paddle boats, and door knobs

18. Compound machines
A machine that combines two or more simple machines is called a compound machine.
Within a compound machine, the output force of one simple machine becomes the input force of another simple machine.