1. TGs San Diego Closing Report
July 2006
doc.: IEEE /1126r0
July 2006
TGs San Diego Closing Report
Date:
Authors:
Notice: This document has been prepared to assist IEEE It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures < ieee802.org/guides/bylaws/sb-bylaws.pdf>, including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within the IEEE Working Group. If you have questions, contact the IEEE Patent Committee Administrator at
Donald Eastlake 3rd, Motorola
Donald Eastlake 3rd, Motorola

2. July 2006
doc.: IEEE /1126r0
July 2006
Abstract
Report of TGs, ESS Mesh Networking Task Group, to the July, 2006 (San Diego, California) closing Plenary.
TGs Motto: Perfection is achieved not when there is nothing left to add but when there is nothing left to take away.
Donald Eastlake 3rd, Motorola
Donald Eastlake 3rd, Motorola

3. TGs Closing Plenary Report
July 2006
doc.: IEEE /1126r0
July 2006
TGs Closing Plenary Report
An annotated agenda is available in 11-06/827r9. The draft minutes will be 11-06/1007.
In March, TGs confirmed a single proposal, directed the Editor to produce a Draft, and issued an informal call for technical comments on D0.01 ending 1 May comments were received from 18 people.
During the May meeting 121, or about 43% of these 283 comments, were resolved and there after the current D0.02 was created.
During this meeting a number of additional comment resolutions were adopted and the Editor requested to produce a D0.03.
Donald Eastlake 3rd, Motorola
Donald Eastlake 3rd, Motorola

4. TGs Closing Plenary Report
July 2006
doc.: IEEE /1126r0
July 2006
TGs Closing Plenary Report
TGs teleconferences have been scheduled between the July and September meetings for the purpose of discussing Draft improvement. These calls will be Wednesday at 17:00 Eastern US Time, starting 2 August and ending 6 September.
Goals for the September meeting in Melbourne, Australia:
Complete resolution of informal technical review comments.
Go to Working Group Letter Ballot with a Draft 1.0.
Donald Eastlake 3rd, Motorola
Donald Eastlake 3rd, Motorola