1. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: Proposed Resolution for Comment CID 54 from Letter Ballot #104
Date Submitted: May 10, 2015
Source: Soo-Young Chang (SYCA), Jaebeom Kim (Ajou Univ.), and Jaehwan Kim and Sangsung Choi (ETRI)
Company: SYCA, Ajou Univ. and ETRI
Address:
Voice: , and
Re:
Abstract: Proposed comment resolution for a comment on the draft of TG10 L2R routing for Letter Ballot #104
Purpose: To suggest a comment resolution for Letter Ballot #104
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Soo-Young Chang (SYCA) et al
<author>, <company>

2. Comment CID 54 Commentor Comment Proposed Change Tero Kivinen.
May 2015
Comment CID 54
Commentor
Tero Kivinen.
Comment
Short addresses and PAN ID. If we have L2R mesh tree spanning over multiple PANs as described in figure 3, then we might need to use PAN ID + short address to identify device. Now we have lots of IEs only having short address, not short address + PAN ID. Is it assumed that for each of those IEs, the short addressed used in there, are associated with the PAN ID sent in the MHR or what?
Proposed Change
None
Soo-Young Chang (SYCA) et al

3. Proposed Resolution (Accept in Principle)
May 2015
Proposed Resolution (Accept in Principle)
Proposed Change
Change p9 Lines to
An L2R mesh tree may also span several PANs organized in different neighboring clusters such as in a TMCTP network ([15.4], 6.2.8). An L2R mesh tree deployed over several PANs is illustrated in Figure 3. In this scenario, all L2R devices must use extended address mode to avoid address confliction between PANs.
Soo-Young Chang (SYCA) et al