1. 9. Inductance M is a geometrical factor! L is a geometrical factor!
1) Mutual inductance 2 1 I1
M is a geometrical factor!
2) Self-inductance
L is a geometrical factor!
Units: (henry)

2. l – length (or V=Al – volume)
3) Example: Self-inductance of a solenoid
Three geometrical quantities describe a solenoid:
A – area of cross-section
l – length (or V=Al – volume)
N – number of turns (or n=N/l – number of turns per unit length)
Self-inductance L should be a function of these quantities,
and should be independent from the current in the solenoid!
is proportional to I !
Example:

3. 10. RL circuits L I 1) Circuit with emf R 2) Circuit without emf
Relaxation time
2) Circuit without emf

4. Example: Two tightly wound solenoid have the same length and circular cross-sectional area. They use wires made from the same material, but solenoid 1 uses wire that is half as thick as solenoid 2. What is the ratio of their inductances? What is the ratio of their time constants (assuming no other resistance in the circuits)? a) b)

5. 11. Energy stored in an inductor 11a. Energy of magnetic field
power from
the battery
dissipation in
the resister
power supplied
to the inductor
For any inductor!
11a. Energy of magnetic field
For solenoid:
V – volume
Magnetic energy density:
(for any magnetic field B)
Example:

6. 12. AC circuits and reactance
1) Resistor
Current & voltage
are in phase t

7. 2) Inductor The current lags the voltage by 90° t inductive reactance:
If the frequency is low then the reactance is small!
If the frequency is high then the reactance is big!
Example:

8. 3) Capacitor The current leads the voltage by 90° t I
capacitive reactance: V
If the frequency is low then the reactance is big
If the frequency is high then the reactance is small!
Example: