1. UNIk² GPS FIRST USE Let’s start
To switch on, press for a short time To switch off, press about 3s
Edition du 13/04/2018
copyright by ERTF
Copyright by ERTF

2. Check the GPS is working
Classic sample of a day
Check the GPS is working
Bad satellite reception (should disappear a few minutes after switching on)
Reception by the internal emergency antenna
Power supply by the vehicle
Power supply by the internal battery
copyright by ERTF
Copyright by ERTF

3. Classic sample of a day Enter the stage code Press on COD
On Unik 2 Bike/Quad, navigation menu is on the left of the screen, it disappears after few seconds, I can make it appears at anytime by using one of the key.
copyright by ERTF
Copyright by ERTF

4. Classic sample of a day Enter the stage code Press on CD1
Enter the code with the blue arrows
Enter the code using the + and - keys
Go to the next number with the key
and then validate the entire code with ENT
Validate with ENT
copyright by ERTF
Copyright by ERTF

5. Classic sample of a day Main navigation screen
Number of validated waypoints
(here, 1 waypoint validated)
Course To Waypoint : Heading to follow to reach the target waypoint
Name of the target waypoint
Course Over Ground : Heading followed by the vehicle
Number of the target waypoint (here N°2)
Target waypoint direction
Speed Over Ground : Vehicle speed
Distance To Waypoint : Target waypoint distance
Total Odometer : Distance already done by the vehicle
copyright by ERTF
Copyright by ERTF

6. Classic sample of a day WPI or WPCv or WPS Course To Waypoint :
Heading to follow to reach the target waypoint (hidden information)
Name of the target waypoint
Here, target waypoint is waypoint N°5
Course Over Ground : Heading followed by the vehicle
Distance To Waypoint :
Target waypoint distance (hidden information)
copyright by ERTF
Copyright by ERTF

7. Total ODO adjusts automatically at waypoint.
Classic sample of a day
Waypoints names
WPT N°
WPT NAME
KM ROAD BOOK 1
DSS3
0,00 2
WPI01
2,47 3
CPV1
6,99 4
WPD01
10,25 5
K15
15,12 6
DZSC1
17,34 7
CP1
18,97 8
2DN01
19,53 9
54,80 10
DZ89
89,78 11
FZ91
91,03 12
ASS3
120,48 13
BIV3
120,68
Total ODO adjusts automatically at waypoint.
copyright by ERTF

8. Visibility radius and validation
Classic sample of a day
Visibility radius and validation
The arrow shows the target waypoint direction. It appears in a 3000/500/200m visibility radius depending wpt quality.
The GPS validates automatically the waypoint when you get in the 200/90/50m of the target waypoint and switches to the next one.
copyright by ERTF
Copyright by ERTF

9. Classic sample of a day Automatical waypoint skipping
If you validate the WPT 6 before the WPT 5, GPS shows the following screen :
GPS shows that there is a waypoint skipping :
To keep going to WPT 7, press YES.
To stay on WPT 5, press NO.
copyright by ERTF
Copyright by ERTF

10. Classic sample of a day Manual waypoint skipping
You want to change the target waypoint :
NXT : to change the target waypoint
W+ : to go to the next waypoint
W- : to come back to the previous waypoint
copyright by ERTF
Copyright by ERTF 10

11. Odometer function adjustment
ODO total is adjusted automatically at waypoint.
You can adjust manually the total.
+ / - : Modification of the Total counter in hundred meters
PARTIAL reset to 0
Select + or -
Validate
BKW : odometer decrementing with ODO TOTAL hightlighted in red
copyright by ERTF
Copyright by ERTF

12. Speed control
Limit
Maximum speed allowed in the stages : 140km/h for the trucks
copyright by ERTF
Copyright by ERTF

13. Speed control
Functionning
copyright by ERTF
Copyright by ERTF

14. Speed control Screen display You are in a DZ radius : tolerance zone
Speed control in progress
In case of overspeed, the exclamation mark blinks and the buzzer rings (Speedox function activated)
copyright by ERTF
Copyright by ERTF

15. Speed control Speedox function
2 beeps per second from the speed limit – 5 km/h
Here 45 km/h
Continuous sound from the speed limit – 3 km/h
Here 47 km/h
SECURITY
1 bip per 30 seconds from the speed limit – 4 km/h
Here 46 km/h
Continuous sound from the speed limit – 2 km/h
Here 48 km/h
PERFORMANCE
copyright by ERTF
Copyright by ERTF

16. Speed control CP with speed limit Copyright by ERTF 16

17. Return on tracks Back Track
You are lost, you are looking for a waypoint and you come back on your own tracks.
When you have done 300m in the opposite direction, GPS shows :
Buzzer rings
3 times
copyright by ERTF
Copyright by ERTF

18. Frontal impact risk Impact Alert
A competitor comes to you in the opposite direction.
When you are at 200m one from the other, GPS shows :
Buzzer rings
continuously
copyright by ERTF
Copyright by ERTF

19. Bivouac arrival Control
When the last waypoint is validated, GPS shows a summary of the controls :
If OK appears on the middle of the compass, all is correct.
CHK to go to CHECK screen
It appears :
- SPD: when one or several overspeeds have been registered in a speed control zone (DZ-FZ)
- CP: when one or several waypoints were missed
- VMX: when one or several overspeeds for maximal speed have been registered
copyright by ERTF
Copyright by ERTF

20. Bivouac arrival Check Number of missed waypoints Number of overspeeds
Competitor race number
Stage name
Maximal speed overspeed
Number of masked waypoints revealed by the unlock code
Stage code
copyright by ERTF
Copyright by ERTF

21. Sentinel function A car is overtaking > 2s Distance < 300m
copyright by ERTF 21
Copyright by ERTF 21

22. Sentinel function A truck is overtaking > 2s
If distance is under 300m
> 2s
copyright by ERTF 22
Copyright by ERTF 22

23. Sentinel function Overtaking acknowledgment
Confirmation:
1 beep, 2 beeps for automatical acknowledgment
Press briefly to acknowledge.
If not, an automatically acknowledgement is sent after 6s.
copyright by ERTF 23
Copyright by ERTF 23

24. Sentinel function Accident Alarm I receive the Alarm I send the Alarm
250m max for reception
I send the Alarm OR
Automatically if vehicle on the side
copyright by ERTF
Flash is optional
Copyright by ERTF

25. FOR FURTHER INFORMATION: PLEASE CONTACT ERTF TEAM competition@ertf.com
copyright by ERTF
Copyright by ERTF