Presentation is loading. Please wait.

Presentation is loading. Please wait.

Superconducting High Brightness RF Photoinjector Design

Similar presentations


Presentation on theme: "Superconducting High Brightness RF Photoinjector Design"— Presentation transcript:

1 Superconducting High Brightness RF Photoinjector Design
M. Ferrario, J. B. Rosenzweig, J. Sekutowicz, G.Travish, W. D. Moeller INFN, UCLA, DESY

2 Main Questions/Concerns
Emittance Compensation ? High Peak Field on Cathode ? Cathode Materials and QE ? Q degradation due to Magnetic Field ?

3

4 Before Cool-Down B After Cool-Down B

5

6 No independent tuning of accelerating field and RF focusing effects
Transverse non linearities

7

8 LCLS GUN + SOLENOID

9 Gun Working Point

10 these slices also carry the most pronounced energy spread

11 Matching Conditions with the Linac

12 Linac Working Point The emittance compensation occuring in the booster when the invariant envelope matching conditions are satisfied is actually limited by the head and tail slice behavior

13 Splitting Acceleration and Focusing
25 cm 10 cm 50 cm The Solenoid can be placed downstream the cavity Switching on the solenoid when the cavity is cold prevent any trapped magnetic field

14 Scaling the LCLS design from S-band to L-band
(JBR) MV/m==> MV/m 1 nC ==> 2.33 nC

15 L-band SC gun design with coaxial coupler
J. Sekutowicz

16

17 HOMDYN Simulation en [mm-mrad] 3.3 m Z [m] Q =1 nC R =1.69 mm
L =19.8 ps eth = 0.45 mm-mrad Epeak = 60 MV/m (Gun) Eacc = 13 MV/m (Cryo1) B = 3 kG (Solenoid) I = 50 A E = 120 MeV en = 0.6 mm-mrad en [mm-mrad] Z [m] HOMDYN Simulation 6 MeV 3.3 m

18 PARMELA simulations J. B. Rosenzweig

19 SCRF GUN

20 BNL All-Niobium SC Gun No contamination from cathode particles
1/2 cell, 1.3 GHz Maximum Field: 45 MV/m Q.E. of 248 nm with laser cleaning before: 2 x 10-7 after: x 10-5 T. Srinivasan-Rao et al., PAC 2003 I. Ben-Zvi, Proc. Int. Workshop, Erlangen, 2002

21 Extrapolation to Higher Field
Measurements at room T on a dedicated DC system Extrapolation to Higher Field SCRF GUN Measured Limited by the available voltage

22

23 CONCLUSIONS RF focusing is not necessary 60 MV/m peak field in SC cavity have been already demonstrated Work in BNL to demonstrate Nb QE 60 MV/m plus new ideas Multibunch effects The new working point for a Split Photoinjector can be easily adopted by a SCRF gun

24 Simple Case: Transport in a Long Solenoid
==> Equilibrium solution ? ==> g(x)

25 Small perturbations around the equilibrium solution
Same Plasma Frequencies Different Amplitudes

26 Envelope oscillations drive Emittance oscillations
sr(z) e(z)

27 Bunch with a Linear Energy Spread Correlation

28 A Spread in Plasma Frequencies drives a Beating in Emittance Oscillations

29 On a longer time scale

30 increasing the initial envelope offset the emittance evolution is dominated by the beating term and the original minimum is recovered only after a longer period


Download ppt "Superconducting High Brightness RF Photoinjector Design"

Similar presentations


Ads by Google