1. IRRInet-M IRRInet-ACE Product Introduction
Presented By: AK
Updated: Dec 2, 2007

2. Upon completion of this presentation, you should be able to:
Understand all HW options
Understand all Configuration options
Understand Migration of new HW into legacy systems
Understand all Models and Options
Understand all about on-site programming tool (Pocket-PC)

3. IRRInet-M - General View
IRRInet-M AC
24VAC Power In (AC)
Commonality
Inputs/Outputs
- 12 Outputs, 4 DI on the Basic board
- 12 Outputs, 4 DI on the Expansion board
Communication Ports:
- RS232/485
- RS232
- Radio/Line
Power:
- 12V DC in
- 5, 7.5, 9.5, 12V DC (2Amp) Power out for portable radio
20 LED for Status display
1 Push button (various functions)
12VDC Power In
Relay outputs for Solenoids: 24V AC or, External power connection
IRRInet-M DC
12VDC Power In
DC Latch Solenoids activated by 3300 µF 35 VDC capacitor

4. IRRInet-M – Master/Slave configuration (1)
IRRInet-M supports 3 modes of operations
RTU (loaded with IRRI 7.0 Master)
Performing all irrigation functions (IRRIV Capabilities)
Reporting to the ICC, Via the MDLC Cloud
Stand Alone (loaded with IRRI 7.0 Master)
Performing all irrigation functions as a stand-alone unit
when the system is installed without an ICC
Remote I/O (loaded with IRRI 7.0 Slave)
Serving as a Distributed I/O for another unit (the Master)
Please note!
In the PAST whenever using SCORPIO or IRRIcom, it was ALWAYS as a Remote I/O to a Master IRRInet
This is NOT a MUST anymore!
Use the Slave option only when needed!!

5. IRRInet-M – Master/Slave configuration (2)
MDLC
ICC
FIU
Master
Slave
Loaded with IRRIV 7.0 Slave
Master
Master
Loaded with IRRIV 7.0 Master
Slave

6. IRRInet-M – RS485 Port Options
MDLC D
ICC
FIU
RS485
Master
MDLC Connection to ICC
Master
RS485 A
RS485 C
Slave
RS485
Remote I/O (Slave) to IRRInet-ACE Master B
Master
Operating Piccolo XR’s
Remote I/O (Slave) to IRRInet-M Master
Slave
PIU

7. IRRInet-M – RS232 Port Options
Pocket PC (ARM)
IRRInet-M – RS232 Port Options F
MDLC
RS232
RS232 E
ICC A
IRRInet-M FIU
RS232
Master
MDLC Connection to ICC
Master
RS232 B
RS232 D
Slave
RS232
Remote I/O (Slave) to IRRInet-ACE Master C
Master
Operating Piccolo XR’s
Remote I/O (Slave) to IRRInet-M Master
Slave
PIU

8. IRRInet-M – Radio Port Options (it is Radio or Line, Configurable)
Please note!
C and D may not co-exist with the same unit
MDLC
RS232 E
ICC A
Radio Link, MDLC Cloud
IRRInet-M FIU
Master
Master/Slave Connection to New and/or Old remotes
Master B D
Slave
Remote I/O (Slave) to IRRInet-ACE Master C
Legacy
Scorpio/IRRIcom
Impact
Remote I/O (Slave) to IRRInet-M Master
Slave
You may configure
the IRRInet-M
To “Talk” PRIS

9. IRRInet-M – Line Port Options (it is Radio or Line, Configurable)
MDLC
RS232 C
ICC A
Line Link, MDLC Cloud
IRRInet-M FIU
Master
Master/Slave Connection to another IRRInet-M
Line
Line B
Master
Master to ICC
Slave
Remote I/O (Slave) to IRRInet-M Master

10. Q: I need to add a new device to a network that already has Scorpio(s) or IRRIcom(s). What do I do? A: Below…
FIU
MDLC
ICC
Please note!
Load IRRIV Master for direct connection to ICC or,
Load IRRIV Slave with PRIS protocol to report to the legacy IRRInet-XL/XM
IRRInet XL/XM
IRRIcom
Scorpio
IRRInet-M

11. Q: When should I use IRRInet-M and when should I use IRRInet-ACE
Q: When should I use IRRInet-M and when should I use IRRInet-ACE? A: Below…
MDLC ?
FIU
IRRInet-ACE
ICC
IRRInet-M
This release will deliver the following for the IRRInet-ACE
IRRIV 7.X (Master) running on the IRRInet-ACE
Usage of current released I/O Modules
Support on-site programming, using Pocket PC machine (ARM based)
It takes a whole System Planner to explain all considerations: but…)
Communication Media
larger variety on IRRInet-ACE
Line needed? only on IRRInet-M
Number of needed Ports (only 3 on IRRInet-M, 5 on IRRInet-ACE
I/O specification
DC solenoids, only on IRRInet-M
Analog I/O only on IRRInet-ACE
I/O count
Up to 24 Outputs and 8 inputs on IRRInet-M, up to 8 Modules on IRRInet-ACE
RUNGS needed? Only on IRRInet-ACE

12. Q: I have an IRRInet XL/XM I need to replace, or add. What do I do
Q: I have an IRRInet XL/XM I need to replace, or add. What do I do? A: Below…
FIU
MDLC
ICC
Option B
IRRInet-ACE
IRRInet XL/XM
Master
Option A
IRRInet-M

13. Q: I need to add IRRInet-ACE, but this unit MUST operate the legacy Scorpio, IRRIcom or Impact. What do I do? A: Below…
Please note!
The IRRInet-M will route the PRIS commands to the legacy units.
It may serve, at the same time, as a slave as well.
MDLC
FIU
ICC
IRRInet-ACE
RS485
IRRInet XL/XM
IRRInet-M
Router
Slave
Scorpio
Impact
IRRIcom

14. A. Connect IRRInet-M to the IRRInet-ACE to serve as its I/O board
Q: In fact, the IRRInet-ACE does not have dedicated Modules for Irrigation, So…? A: Below…
MDLC
FIU
ICC
IRRInet-ACE
RS485
IRRInet-M
A. Connect IRRInet-M to the IRRInet-ACE to serve as its I/O board
(AC and/or DC)
B. Use the ACE’s Relay I/O Module for AC solenoids, or any other ACE original I/O Module

15. IRRInet-M AC User’s Connections1
DO1
DO13 2
DO2
DO14 3
DO3
DO15 4
DO4
DO16 5
DO5
DO17 6
DO6
DO18 7
DO7
DO19 8
DO8
DO20 9
DO9
DO21 10
DO10
DO22
DO11
DO23
DO12
DO24
COM
OUT DO
WET
USER
PGND
DI1
DI5
DI2
DI6
DI3
DI7
DI4
DI8 DI
Please note!
The relays may operate the solenoids using external WET Power (programmable).
Up to 60 VDC or 30 VAC
For Radio Communication
For Radio Power: 5, 7.5, 9.5, 12 VDC, 2 Amp Programmable
Port 3 for Line Communication
12 V DC (Optional): To operate the Logic Board
1A per output, 6 Amp Total
24 VAC for Logic Board and I/O operation
Over Current Detection (10A)

16. IRRInet-M DC User’s Connections1
DO1
DO13 2
DO2
DO14 3
DO3
DO15 4
DO4
DO16 5
DO5
DO17 6
DO6
DO18 7
COM
OUT 8
DO7
DO19 9
DO8
DO20 10
DO9
DO21
DO10
DO22
DO11
DO23
DO12
DO24
USER
PGND
DI1
DI5
DI2
DI6
DI3
DI7
DI4
DI8 DI
Capacitor µF 35 VDC
Discharge Voltage – 4 to 35 VDC (Configurable)
Pulse Width: up to 120mSec
For Radio Communication
For Radio Power: 5, 7.5, 9.5, 12 VDC, 2 Amp Programmable
Port 3 for Line Communication
12 V DC for Logic board and Solenoids operation
Open Loop and Short
Detection

17. IRRInet-M – New Front Label
New Design
20 LED's for: (detailed explanation in the Manual)
CPU Status
I/O Status
Error Logger Status

18. IRRInet-M – Push Button
Various Functions
Reset (and download SW)
Test
Scroll Page for LED Display

19. SW Features Capacity User Configuration
IRRInet-M supports 3 modes of operations
RTU (loaded with IRRI 7.0 Master)
Performing all irrigation functions (IRRIV Capabilities)
Reporting to the ICC, Via the MDLC Cloud
Stand Alone (loaded with IRRI 7.0 Master)
Performing all irrigation functions as a stand-alone unit
when the system is installed without an ICC
Remote I/O (loaded with IRRI 7.0 Slave)
Serving as a Distributed I/O for another unit (the Master)
Capacity
250 Outputs
250 Inputs
125 Main Lines
200 Programs
200 Groups
50 Fertilizer Pumps
50 Filter Batteries
User Configuration
Solenoid Operation Voltage (IRRInet-M DC)
Radio Operation Power (AC and DC)
External/Internal Relay’s Power Switching (IRRInet-M AC)

20. On-Site Programming SW (Pocket PC Connectivity (ARM Only)
2 Modes of operation:
Terminal
Stand-Alone
On-Site Programming SW (Pocket PC Connectivity (ARM Only)
Windows Mobile 5.X compatible
Product
IRRIcom
IRRInet- XM
IRRInet-XL
IRRInet-M
IRRInet-ACE
Pocket PC Connection to… NO
Running
IRRIV
5.X
Running IRRIV
7.X (Master only)
7.X (Master)
Please note!
F4050A – on-site Programming SW, for Pocket PC.

21. Configuration Tool STS STS Software
The new STS (ACE3600 Configuration Tool), will be used to configure the IRRInet-M and the IRRInet-ACE
STS Software

22. IRRInet-M Models and Options (1)
Please note!
Entering Frequency is Mandatory for models W/Radio
IRRInet-M DC
F4960A
IRRInet-M DC no Radio
F4964A
IRRInet-M DC with UHF Portable Radio
F4963A
IRRInet-M DC with VHF Portable Radio
IRRInet-M AC
F4860A
IRRInet-M AC no Radio
F4864A
IRRInet-M AC with UHF portable Radio
F4863A
IRRInet-M AC with VHF Portable Radio

23. IRRInet-M Models and Options (2)
For VHF Radio
V951AM VHF Radio for N.A (HT750)
For UHF Radio
V951AN UHF Radio for N.A (HT750)
Please note!
The AC Expansion fits both the IRRInet-M AC and DC main boards
V314AR
Add DC 4/12 I/O Expansion
V803
Load IRRIV 7.0 Master Application
V260AM
Add AC 4/12 I/O Expansion
V804
Load IRRIV 7.0 Slave Application
V020AC
DIN Rail Installation Kit

24. IRRInet-ACE Models and Options
For IRRInet-ACE use ACE3600 catalog pages, and…
V450 to order IRRInet-ACE 3610 CPU (this CPU is identified with the Irrigation)
V451 to order IRRInet-ACE 3640 CPU (this CPU is identified with the Irrigation)
V805 ask factory to load IRRIV 7.X application (Master) into the CPU

25. New deliverables summary
IRRInet-M
IRRInet-M AC
IRRInet-M DC
IRRInet-M AC Expansion Board
IRRInet-M DC Expansion Board
IRRIV 7.X for IRRInet-M Master
IRRIV 7.X for IRRInet-M Slave
IRRInet-ACE
IRRIV 7.X for IRRInet-ACE Master
STS – New version supporting Irrigation
ICC – New version 14.X (supporting new deliverables)
On-Site Programming SW (for Pocket PC)

26. END
Thank YOU!