1. Arduino Switch Soldering 2
8 wires will protude from the switch tunnel assembly. Careful choice of wire colours will ensure a job which is easy to interface with.
Greg Moore 2012 Folding the switch tunnel

2. Arduino Switch Soldering 2
!! The Switch wiring shown here may not match the circuit!!
Greg Moore 2012 Folding the switch tunnel

3. Arduino Switch Soldering 2
Read your circuit diagram, refer to both soldering the wires PPT presentations.
Greg Moore 2012 Folding the switch tunnel

4. Arduino Switch Soldering
Please see the large schematic of the switch tunnel box.
The LED’s and switches shown here. Note heatshrink.
Greg Moore 2012 Folding the switch tunnel

5. Arduino Switch Soldering
Please see the large schematic of the switch tunnel box.
Greg Moore 2012 Folding the switch tunnel

6. Arduino Switch Soldering
The connecting wires will interface with the terminal strip which is fixed to the breadboard.
Greg Moore 2012 Folding the switch tunnel

7. Arduino Switch Soldering
The connecting wires will interface with the terminal strip which is fixed to the breadboard.
Greg Moore 2012 Folding the switch tunnel

8. Arduino Switch Soldering
See the next PPT to understand how the breadboard interfaces with the Arduino UNO
Greg Moore 2012 Folding the switch tunnel

9. Arduino Switch Soldering
The connecting wires will interface with the terminal strip which is fixed to the breadboard.
Greg Moore 2012 Folding the switch tunnel

10. Arduino Switch Soldering 2
If you do not understand the wiring concepts used, or even if you do, you MUST have your teacher check your work.
Greg Moore 2012 Folding the switch tunnel

11. Arduino Switch Soldering
UEENEEE002B AND UEENEEE027B
The End
Greg Moore 2012 Folding the switch tunnel