1. HUSQVARNA

2. HUSQVARNA
ERGONOMICS

3. NATURAL POSITION The basis for designing products

4. Distance between front and rear hand positions.
A distance between the handles the same as the width of a normal man’s (or woman’s) shoulders, makes it easier to control the saw.
The greater width between the user’s hands also makes the machine cut deeper when held symmetrically

5. CUTTING AT GROUND LEVEL Distribution of force.
8.2 lbf
19.2 lbf
4.2 lbf
15.4 lbf
22 lbf
22 lbf

6. NATURAL POSITION The basis for designing products

7. VERTICAL CUTTING Distribution of force.
Wider-spaced handles means that less force is needed to lift the rear handle and apply pressure to the working point.
Greater distance between the user’s hands, both vertically and horizontally, also offers more precise control, which leads to higher precision.

8. VERTICAL CUTTING Distribution of force.
4.9 lbf
17.2 lbf
21.0 lbf
9.7 lbf
22 lbf
22 lbf

9. HORIZONTAL CUTTING Distribution of force.
With a handle on each side of the center of gravity, your grip becomes more symmetrical and puts a more natural load on your body.

10. HORIZONTAL CUTTING Distribution of force.
29.8 lbf
21.6 lbf
4.4 lbf
4.0 lbf

11. SUMMARY Husqvarna’s design is more ergonomical, because of:
Position of center of gravity
Handle positions
This means:
Less stress on the body
Less fatigue
Better precision
Better efficiency/Cuts faster

12. EFFICIENT ENGINEERING=
SMART SOLUTIONS

13. A well balanced weight relation between engine and handle unit with exactly positioned av-springs reduces vibrations to below 5 m/s2. This will cause less fatigue and give better productivity.

14. WHY HUSQVARNA
The whole intake system is built into one module. Makes it very easy to dismount for repair if needed. K750

15. WHY HUSQVARNA
X-TORQ®, piston controlled technology that provides less emissions, 60-70% less fuel consumtion, -15%, more cutting power, +10%.
DuraStarter™ with long-life starter rope. Sealed mechanism and rope will provide durable function for months!
Can even be pressure washed!

16. WHY HUSQVARNA
Poly-V belt drive not only ensures excellent durability and virtually everlasting life. It also transmits the power and torque from the engine to the blade with a minimum of powerloss and slippage. Extremely important in order to utilize the excellent bottom end power in the X-Torq engines.

17. WHY HUSQVARNA
Husqvarna X-TORQ®, a better choice for the environment.

18. WHY HUSQVARNA
Weight
16”
16”
14”
14”
K750
K960
TS800
TS420

19. WHY HUSQVARNA
Power / Weight
16”
14”
16”
14”
K750
K960
TS800
TS410/420

20. WHY HUSQVARNA
Active air filtration is one of the most effective air filter systems on the market.
The cyclone air filter system has also shown itself to be a good system.

21. WHY HUSQVARNA
By loosening only two screws the whole power head can be removed and reverse for outboard cutting.

22. WHY HUSQVARNA
See through window in the fuel tank to easily determine how much fuel is left. Makes it easier to plan the work.
Conveniently placed holder for the combination spanner. Especially useful for rental companies and their customers.

23. WHY HUSQVARNA
The water valve is conveniently located to make it easy to adjust to the correct amount of water during each specific application.