1. THE BEST WATERPROOFING & WEATHER PROTECTION
SMAC® ALL AROUND PROTECTION Based on Multi-ceramic & Nano Technology

2. PROTECTION OF CONCRETE STRUCTURES
Protection of modern concrete structures is the most serious problem being faced by all the stake holders in the industry, worldwide. Most of the solutions devised, can offer protection within certain limits: applicable both to the treatment & the structure.

3. These limitations mainly constitute the physical & in some cases, chemical stability parameters of the structure and the treatment applied to it. The long term durability of the treatment applied is a function of these attributes of the treatment and the substrate on which it has been applied. It must be borne in mind that, good workmanship & good quality of all the materials are of paramount importance and any subsequent treatment can’t be a sure remedy to cure the problems arising due to lack of them.

4. Structure Parameters
The important attributes for a structure for devising a good protective treatment can be summarized as given below:
Integrity of the structural element to be treated: Distorted/flaked/damaged
Stability of the structural system
Probable dimensional variations in the element to be treated: Expansion/contraction

5. Type of the structure element : Temporary/Long Term
Service conditions anticipated: Immersed/Dry/Indoor/Outdoor/Mixed/ Chemical Resistance/Abrasion Resistance /Damp
Some other site specific parameters may also be required to be considered, if the situation so warrants. For example: Additional service like Temperature Insulation, required.

6. Treatment Parameters
The important attributes of the proposed treatment under consideration for prolonged service can be summarized as below:
Type of protection required: Long term/short term: Simple/Complex treatment
Temperature variations in the structural system: Flexible/Rigid treatment
Joints in the structure like construction and/or expansion type: Sealant application

7. Nature of substrate: Concrete/Plaster/Brick or Stone Masonry compatibility.
Level of the structure with respect to GL:
+ve/-ve side application, water head.
Service conditions anticipated: Immersed/Dry/Indoor/Outdoor/Mixed/ Chemical Resistance/Abrasion Resistance
Some other site specific conditions may be required to be considered, like subsequent decorative treatment application & Heat insulation.

8. Treatments Available
Commercially available treatments for a structure are mainly classified into following distinct types:
Various coatings like Epoxies, Polyurethanes, Acrylics, Silicones, Silanes, Siloxanes, Rubberised coatings etc.
Membrane treatments like felts, plastic meshes, fiber glass reinforcement etc embedded in various coating materials mentioned above.

9. Water repellent treatments like Silicones, Silanes, Siloxanes etc.
Penetrating sealers like Crystalline waterproofing systems.
Sealants like Poly Sulphides, Acrylics, Polyurethanes, Silicones, Epoxies etc.
Fast setting plugging compounds
Integral mixing compounds based on various chemical compositions (Ready-mix mortars are based on this concept)

10. Salient Features of Various Treatments
The treatments available in the market can be broadly divided into two basic types:
Rigid type treatments
Flexible type treatments
Rigid type treatments can’t withstand subsequent stresses in the substrate & crack with it. Epoxies, Conventional cementitious renders, Penetrants, Cement based Acrylic coatings are all rigid type treatments.

11. Rigid treatments are chosen for the structural elements, for which service conditions are stable in respect of fatigue & temperature. For example: small slabs, WC areas, sub-soil structures & water reservoirs. These are also the choice for good wear/abrasion & chemical resistance during service life. Flexible treatments are the choice when the substrates are open to atmospheric vagaries and when the fatigue & temperature variations are anticipated during service tenure of the treatment.

12. Flexible treatments can take care of future deformation, when applied with proper choice & prior consultation with a Waterproofing & Construction Chemicals Consultant. Silicones, Silanes, Siloxanes, Polyurethanes, Rubbererized coatings, Acrylics, Tar & Bitumen & Membranes are the flexible treatments. The degree of elasticity varies considerably among them & a choice is to be made depending upon the structure to be treated.

13. It must be noted, that these treatments can take care of minor variations only and major variations, if anticipated, must be resolved at the design & construction stage itself. Further, no single treatment can be a single remedy of all the anticipated problems. A judicious combination of multiple choices result in a sound structure protection for an extended period of time.

14. Other major consideration is the UV stability & Toxicity
Other major consideration is the UV stability & Toxicity. Many Epoxies, Tar, Bitumen require a protective render to protect them from UV radiation. Similarly, some treatments can perform from –ve side of the water pressure also, while others can’t. Only Crystalline Penetrating Sealers are effective from –ve pressure side.

15. Prime Consideration For Selection
For a good protective treatment to be effective over a long period of time, some important aspects to be considered while finalization are as below:
Prime functions required to be performed by the protective treatment.
Additional functions required to be performed by the protective treatment
Financial constraints/implications

16. First, a good protective treatment performs the primary functions like Waterproofing /Weatherproofing /Chemical Protection etc efficiently, in the existing environment of the site. By this, we mean that it has required attributes like elasticity, abrasion resistance, UV resistance, ease of application etc suitable for that particular structure, to the extent practically possible.

17. Maintenance in future etc Must also be considered.
Second, additional functions such as:
Water drainage
-ve side application
Thermal insulation
Aesthetic appearance
Maintenance in future etc
Must also be considered.

18. Lastly, the most important aspect of financial considerations comes into picture. The rates come last in the hierarchy, as we must first consider the functional efficacy of the treatment. Then, to achieve the required correct performance, we should proceed for the most economical treatment. Remember: Quality never comes cheap. The right quality at an appropriate cost is the key to success.

19. THE SMAC® PROTECTION
The SMAC® all purpose protection was developed by SM Adhesives, Mumbai, keeping in mind the Indian weather conditions as well as all the constraints mentioned previously. It encompasses most of the desirable attributes required in Indian weather conditions. It is based on Multi-ceramic & Nano technology, which produces a unique protective effect.

20. About SM Adhesives
SM Adhesives was founded by Mr. Atul Awade, an entrepreneur, in Mr. Awade completed his graduation in Chemical Engineering in He was with Hyundai Heavy Industries as Project Head for an industrial project. He handled the responsibilities of Civil as well as Mechanical part of the project. He started SM Adhesives with products like Waterproofing & Anti-corrosive coatings.

21. SM Adhesives has grown at about 15% cumulatively, since then, on y-o-y basis. We have developed a revolutionary concept in the field of Structural Protection: SMAC® All Purpose Protection. It is a concept encompassing most of the protective requirements. It relieves the construction professionals of multiple & complicated protective installations. Further, by being installed by factory trained personnel, it offers best quality. The important point: It eliminates conventional BB coba type treatments & saves environment by conserving precious scarce natural resources.

22. Selfless Devotion to Clients Strong Long Term Relationships
OUR PHILOSOPHY
At SM Adhesives, we follow 6 S approach:
Sound Technology
Service Excellence
Superior Quality
Selfless Devotion to Clients
Strong Long Term Relationships
Sagacious Business & Environment Approach

23. What is SMAC® Protection?
SMAC® has four courses installed over the substrate. Each course serves specific & distinct function. The courses are:
SMAC® Bondcrete HR Penetrating & Heat Insulation Base coat
SMAC® UV stabilised Polypropylene Membrane
SMAC® Elastobond Elastomeric Heat Reflective Coat
SMAC® Polyurethane Screed Top Coat

24. SMAC® Bondcrete HR is a liquid formulation which is an organic polymer fortified by Multi-ceramic & Nano Technology. It has penetrating ability in the substrate to seal the capillaries. It also provides heat insulation effect because of SMAC® Therm technology. SMAC® UV stabilised Polypropylene membrane is the reinforcement, which is manufactured with special care to withstand Ultra Violet embrittlement effectively. It resists expansion/contraction stresses & consequent cracking of the treatment.

25. SMAC® Elastobond is again a liquid formulation incorporating the above mentioned properties, but also has good elastic nature to withstand cracking. SMAC® PU screed is the top coat having hard, wear resistant aggregates in Polyurethane matrix. This coat takes care of the normal wear & tear due to foot traffic during the service life of the treatment.

26. SMAC® MULTI-CERAMIC & NANO TECHNOLOGY
SMAC® Multi-ceramic & Nano Technology is the result of continuous research to homogenize all the treatment elements to act in unison to work in tandem. This is essential to produce all the desired protection simulteniously. The ceramic nano particles are dispersed in the liquid polymer phase. These ceramic particles are inert in nature & are hollow.

27. Polymer nano particles are also there in the liquid phase
Polymer nano particles are also there in the liquid phase. After application of SMAC® protection, polymer nano particles penetrate through the substrate micro cracks & fill them. Further, they react with the ceramic nano particles to form a cross-linked stable & elastic phase. The technology ensures that the ceramic particles float on the top & also cover the bottom layer of the treatment.

28. ACTION OF NANO PARTICLES
SMAC® PROTECTION
ACTION OF NANO PARTICLES

29. SMAC® BONDCRETE HR COAT

30. PENETRATION OF NANO PARTICLES

31. Enlarged View of Nano Particles’ Penetration

32. SMAC® MEMBRANE PLACEMENT

33. SMAC® ELASTOBOND COAT

34. SMAC® POLYURETHANE SCREED TOP COAT

35. SMAC® NANO PARTICLE CROSS LINKING

36. SMAC® PROTECTION FEATURES
WATER REPELLENCY AND WATERPROOFING CAPABILITY

37. RETAINS BREATHING OF CONCRTE: ELIMINATES CONDENSATION INDOORS
WATER VAPOUR

38. ULTRA VIOLET RADIATION STABILITY AND HEAT PROTECTION

39. GOOD PENETRATION ABILITY & ENHANCED PROTECTION FOR LONGER PERIODS

40. GOOD CRACKING RESISTANCE

41. THE SMAC® ADVANTAGES
The polymer nano particles penetrate the micro cracks in the concrete & fill them to produce sealing effect.
The ceramic nano particles float all around the treatment. Being inert & non-conductive, they produce heat insulation effect. Also, being embedded in the polymer matrix, they produce a good waterproofing & weatherproofing effect.

42. Due to combination of Multi-ceramic & Nano Technology based intelligent materials, the SMAC® Protection offers excellent long term waterproofing & weatherproofing resistant to cracking & heat.
The DFT of the total treatment is also good (about 3-4 mm) and good coverage is achieved.
Temperature reduction of up to 20% through roof slab can be achieved.

43. Due to high quality polymer base materials like poly siloxanes, polyurethanes, acrylics & silicones, the SMAC® Protection offers excellent resistance to mild acids, alkalies, carbonation & atmospheric pollutants.
Can be applied on damp surfaces.
Suitable for all cement & mineral substrates like AC sheets, china mosaic & tiles.
Flexibility up to 50%, which effectively takes care of potential shrinkage cracking.

44. Saves energy by reducing load on AC unit.
Load on the roof can be reduced by eliminating brick bat coba type treatments.
Saves energy by reducing load on AC unit.
Being water based, it is a Green treatment.
Choice of select colours available. (Blue, Off White, Red, Yellow, Green)
Even while maintaining flexibility, the top PU screed layer withstands normal wear & tear.

45. APPLICATIONS ROOF SLABS OF LARGE BUILDINGS BASEMENTS EXPANSION JOINTS
WALLS OF BUILDINGS
TERRACE GARDENS
SLOPING ROOF SLABS
DECORATIVE & PROTECTIVE TREATMENT

46. Installation Examples
TERRACE SLAB INDUSTRIAL BUILDING

47. TERRACE SLAB RESIDENTIAL BUILDING

48. EXPANSION JOINT

49. VERTICAL WALL

50. BUILDING EXTERIORS

51. Water and Weather proof Flexible Sufficiently wear resistant Green
To conclude, SMAC® Protection is the best available protection, which is:
Water and Weather proof
Flexible
Sufficiently wear resistant
Green
Heat insulating
Durable
Reliable
Decorative

52. All our products are Eco friendly in composition.
Other products
We also have many other products viz.
Nano technology based exterior protective paint coatings
Primer for cement & mineral substrate to enhance protection, bonding & coverage of coatings
Industrial Flooring treatments
Liquid penetrating single component crystalline treatment
Anti corrosive & Chemical Resistant treatments
Acrylic & other polymer products
All our products are Eco friendly in composition.

53. To protect your structures, go for
SMAC® All around Protection
The Best Available Protection!

54. Contact us at: Godrej Edenwoods, 4/A2, REGD OFFICE: S. M. ADHESIVES,
Oak House, Pawar Nagar, Thane (W)
TELEFAX:
WEB:

55. Sales and Technical Office: No
Sales and Technical Office: No. 4, Ganga Bhuvan, SRPS Road, Chetna Apartment, Bhandup (W) Mumbai – Phone: ,

56. Prepared by: Y. P. KULKARNI & ASSOCIATES,
Waterproofing & Construction Chemicals Consultants,
B-5, Raghunath Bhavan, Overseer Colony,
South Shivajinagar,
Sangli –
Phone: , Cell: