Presentation is loading. Please wait.

Presentation is loading. Please wait.

Establishing Safe and Realistic Speed Limits

Similar presentations


Presentation on theme: "Establishing Safe and Realistic Speed Limits"— Presentation transcript:

1 Establishing Safe and Realistic Speed Limits
Lt. Gary Megge Michigan State Police Traffic Services Section michigan.gov/msp-traffic

2 Our Goal is to Reduce the Number of Fatal and Serious Injury Crashes

3

4 How are Speed Limits Established?
A speed study is completed (85th percentile speed determined) Traffic crash data is analyzed (number/rate and types of crashes) Roadside environment is assessed (residential, commercial, rural, etc.) Roadway configuration is considered (number of lanes, length of road, etc.) All other factors that influence traffic and pedestrian movement are included in the “Engineering and Traffic Investigation”

5 How is a Speed Study Completed?
Conducted during ideal driving conditions (dry roads with free flow traffic) Vehicle speeds are recorded away from influencing factors (railroad crossings, signalized intersections, curves in the roadway, etc.) Completed using a LIDAR (laser) in an unmarked vehicle parked in an inconspicuous location, or with automated tube counters

6 What is “85th Percentile Speed”?
The speed that 85 percent of the vehicles are traveling at or below Ideal speed to set as the maximum limit: Provides the lowest speed variance between vehicles, and thus provides the lowest crash numbers Provides optimum enforceability The SAFEST speed limit

7 What is “Variance”? A statistical indicator of the overall uniformity of the data set In the case of a speed study, variance provides a measure of the uniformity of traffic flow Proportional to speed differentials and resulting conflicts between vehicles Minimum variance = greatest uniformity and maximum orderly traffic flow

8 What is “Average Speed”?
The sum total of the speeds in the sample divided by the number of speed data points in the sample Not particularly relevant for speed limit setting, but a conventional measure that people are comfortable with

9 Crash Involvement vs. Speed

10 Six Lane Urban Freeway

11

12

13

14

15

16

17 Speed Studies of Same Road with 55mph Speed Limit and 70mph Speed Limit Average = 66.4mph Variance = Average = 67.7mph Variance = 27.8 (-33%)

18 Three Lane Residential Trunk Line

19

20

21

22

23

24

25 Speed Studies of Same Road with 25mph Speed Limit and 35mph Speed Limit Average = 32.8mph Variance = Average = 32.4mph Variance = 11.2

26

27 A Proper Speed Limit 5 lane roadway
Mixed business with some residential Traffic Control Order for 45 miles per hour was implemented in 1963

28 Five Lane Urban County Road

29

30 Public Perception Perception is that a higher speed limit will make the roadway less safe, because the public falsely thinks the actual travel speeds will increase Similarly, perception is that a lower speed limit will make the roadway safer, because the public falsely thinks the actual travel speeds will decrease

31 Reality The perception of the roadway becoming less safe is the only thing that changes significantly, Travel speeds don’t change That perception of reduced safety can actually enhance safety by causing users to reduce risk taking behavior

32 Jolly 55mph

33 Jolly 45mph

34 Improper Change

35

36 Enforcement Effect

37 Enforcement Effect?

38

39 Thank You


Download ppt "Establishing Safe and Realistic Speed Limits"

Similar presentations


Ads by Google