1. Assignment 1
Creating a Heart

2. Step 10
Once you made the heart object go to front view and add a plane under heart object
Go to the object mode [Tab]
Add a plane [Space  Mesh Plane]
Use [G] to move the center of the plane right under the heart
Check side and top view to check if the plane is under the heart

3. Select the plane and
Scale it [press S to scale] about 10 units on each side of the heart

4. Follow the steps below to paint the plane blue
Click on shading button or press F5
Click on material button
Click on Add New Button

5. Click on the box next to the “Col” button to see selection of colors
Select blue

6. Step 11
Select the Heart and follow the procedures in step 10 to make it a red heart

7. Step 12
Add a camera
Follow the tutorial to adjust the camera

8. Step 13
Add a spot light
Follow the tutorial to adjust the light

9. Step 14
Rotate the heart to face the camera [Press R twice ] and turn it.
If you want you can also add another light to make it look better when rendering is done

10. Step 15
You can render the scene to see how it looks like. You should have something like the following

11. Step 16
Press F1 and save the file under your CS306 directory in your H drive