1. Mimosa18 on PCB (from the chip side)
Pixel(0,0)
Pixel(0,0) A1 A2
Pixel(255,255) (for all arrays) A0 A3
Pixel(0,0)
Pixel(0,0)
ERNI connector (opposite side)
cable

2. 4 matrix of 256*256 pixel.
Self-bias No radiation Tolerant pixel.
Noise optimized.
High precision tracking pixel
This sensors have been designed and fabricated for
this application using AMS 0.35 OPTO process.
Single sensor consists of 512x512 pixel array with
a pitch of 10 µm, providing an active area of 5x5 mm2
fabricated using standard (14 µm thick epitaxy)
and experimental (20 µm epitaxy)