Presentation is loading. Please wait.

Presentation is loading. Please wait.

Data Base Expansion for Bubble Column Flows reported for DOE in period from 1995 to 2001 & summarized by Peter Spicka.

Published byKelley Jackson Modified over 5 years ago

Similar presentations

Presentation on theme: "Data Base Expansion for Bubble Column Flows reported for DOE in period from 1995 to 2001 & summarized by Peter Spicka."— Presentation transcript:

1 Data Base Expansion for Bubble Column Flows reported for DOE in period from 1995 to 2001 & summarized by Peter Spicka

2 Goals Outline Contract DE-FC 22-95 PC 95051
Development of reliable data base for evaluation of parameters in CFD based models Development of improved engineering models for flow mixing and mass transfer in bubble columns Outline Topical review of the data reported for DOE since 1995 Gas Holdup and Liquid Recirculation Solid Loadings and Sparger Effect Scale-Up of Bubble Columns Eddy Diffusivities Summary

3 Gas holdup and Liquid Recirculation
Main aspects of multiphase flow Hydrodynamics is driven by: buoyancy, drag, inertia, pressure, viscous, interface forces… strong coupling between the forces many different scales Commonly used correlations Reference Axial Liquid Velocity Overall gas holdup Reilly et al. (1986) Hammer et al. (1984) Gas holdup radial profile Luo & Svendsen (1991) Centerline axial liquid velocity Joshi & Sharma (1979) Zehner (1982b) Axial liquid velocity profile Garcia-Calvo et al. (1994) The scale-up is tricky and only very sophisticated CFD simulations can resolve all the aspects - feasible in future ? Simplifications: Steady–state one-dimensional flow Only gas holdup, liquid velocity and turbulence radial profiles are determining factors

4 Gas Holdup & Liquid Recirculation I
Gas Holdup & Liquid Recirculation I. Effect of Ug and Liquid Properties (DOE Quarterly Reports 7-11, 1996) Gas holdup profiles Axial velocity profiles air-water air-Drakeoil air-water air-water vs. air-Drakeoil Air-water air-Drakeoil Observations: Increased Ug results in higher holdup and less uniform holdup profile Gas holdup is lower in air-Drakeoil system due to higher liquid viscosity (20 cP) The higher holdup in air-water system results in higher recirculation rate

5 with and without internals
Gas Holdup & Liquid Recirculation II. Effect of Column Diameter & Internals (DOE Quarterly Reports 8 & 9, 1996) Overall gas holdup in 6”, 8” and 18” columns Axial velocity profiles 18” 8” 6” Internals layout 6”& 8” columns with and without internals in 18” columns Observations: Overall gas holdup and liquid recirculation increases with column diameter Effect of internals on axial velocity is less pronounced Internals reduce radial eddy diffusivity ( Chen et al., 1999)

6 Equilateral triangle 1 cm apart Circular rings 1.5 cm apart
Gas Holdup & Liquid Recirculation III. Gas Distributor Effect (DOE Quarterly Report 18, 1999) Ug = 14 cm/s Ug = 30 cm/s Z+ Z- Gas distributors: D1 Porosity = 0.1 % 163 holes of 0.4 mm ID Equilateral triangle 1 cm apart D2 4 holes of 2.6 mm ID Distributed on a cross Single hole of 5.1 mm ID Located in the center D3 D4 Porosity = 0.15 % 163 holes of 0.5 mm ID Porosity = 0.04 % 61 holes of 0.4 mm ID Circular rings 1.5 cm apart D5 D6 Porosity = 1.0 % 163 holes of 1.25 mm ID Observations: Gas distributor effect is visible only at low Ug (14 cm/s) and near the column bottom Flow stabilizes faster when single nozzle distributors are used At Ug of 30 cm/s, the gas distributor effect is negligible

7 Gas Holdup & Liquid Recirculation III
Gas Holdup & Liquid Recirculation III. Gas Distributor Effect (DOE Quarterly Report 14, 1996; Degaleesan et al., 1997) Turbulent kinetic energy profile Liquid Velocity profile 8” column, Ug=12.0 cm/s. Distributors are: Cone (8C), Bubble Cap (8B), and Perforated Plate (8A) Observations: Single nozzle distributors produce larger bubbles flow is less organized with large spiraling structures suppressed recirculation and higher turbulent kinetic energy (about 40% higher compared to multiple nozzles distributors) Multiple holes distributors Smaller bubbles, less violent flow and enhanced recirculation

8 Gas Holdup & Liquid Recirculation IV
Gas Holdup & Liquid Recirculation IV. Pressure Effect (DOE Quarterly Report 22, 2000; Kemoun et al., 2001) 14 Ug cm/s 8 2 6.4” column Findings Almost uniform gas holdup profiles, which are not pressure dependent were observed at lower Ug. This finding is in good agreement with Letzel (1997) In churn-turbulent regime, gas holdup increases with pressure (in the interval from 1 to10 bars) as well as the steepness of the profile Single hole distributor D3 provides visibly higher gas holdup than perforated plate distributors at 4 bars and Ug of 30 cm/s due to increased dispersion and break up of the gas jet produced by the single nozzle (Kling, 1962; Nauze et al., 1974) 6.4” column, 4 bars, Ug= 30 cm/s 6.4” column, axial level z/D = 5.5, distributor D4

9 Gas Holdup & Liquid Recirculation V
Gas Holdup & Liquid Recirculation V. Effect of Solids Loading (DOE Quarterly Report 12, 1998) G-L system G-L-S system Dc inch(cm) 4 (10.2) 6 (14) Composition air - 50% iso-propanol air - water air - 50% iso-propanol - alumina air - water - glass beads Ug [cm/s] 4-12 2.4-12 2-8 2-14 Solids [wt. %] ‑ 10  7, 14 and 20 Particle size [mm] -   - 40-106 Sparger perf.plate, bubble cap perf. plate sintered plate perforated plate Comparison of G-L and G-L-S systems Ug has smaller effect on axial velocity profiles in slurries and its effect decreases with increased concentration of slurries All observed differences can be attributed to altered viscosity and density of the pseudo slurry phase Influence of Solids Loading Axial Distance

10 Eddy Diffusivities Effect of Ug, solids loading (DOE Quarterly Reports 13 & 14, 1998)
Eddy diffusivity Flow in bubble columns is of transient nature Fluctuating character of flow and backmixing can by captured by eddy diffusivity, defined in Langrangian framework as: Findings of the study With increased Ug, the axial eddy diffusivity increases Maximum Dzz occurs at r/R = 0.75 Solids loading does not affect the axial eddy diffusivity profiles significantly Effect of Ug Effect of solids loading 6” column , GLS system, glass particles of 150 mm

11 Eddy Diffusivities Effect of Ug and Dc – correlations (DOE Quarterly Report 13, 1998)
These correlation are valid for air-water systems in large columns size (Dc> 10 cm) and churn-turbulent regime ( Ug > 5 cm/s)

12 Scale–Up Issues I. (DOE Quarterly Report 13, 1998)
CREL contribution II In a separated effort ( not directly funded by DOE), new correlations for radial gas holdup and axial liquid velocity were proposed Chronology: Energy balance models: Whalley & Daviddson (1974) extended by Joshi & Sharma (1979) who proposed circulation structures Momentum balance models: Rietema & Ottengraf (1970) Zehner (1980) Implementation of turbulence: universal mixing length by Ueyama & Miyauchi (1979) Anderson and Rice (1989) proposed a‘three zones’ concept Geary and Rice (1992) proposed model which depends on bubble size CREL contribution I based on CARPT/CT, a new correlation for centerline axial velocity was developed: Wu et al. (2001b) Wu et al. (2001a)

13 Scale –Up Issues II. (DOE Quarterly Report 13, 1998: Degaleesan, 1997)
CREL contribution III Correlations for radial profiles of axial and radial eddy diffusivities were proposed (Valid for churn-turbulent regime and Dc> 10 cm)

14 Summary I. Extensive data base has been created which encompass broad range of operating conditions: Column diameters: 4, 6, 8 and 18 inch column Range of UG : from 2 to 30 cm/s Range of pressure: 1, 4, and 10 bars for 6.4” column Distributors: perfor. plate (various porosities), sintered plate,cross sparger, cone, buble cap Liquids : water, Drakeoil, 50% isopropanol in water Internals in 18”column)

15 Summary II. Gas holdup and liquid recirculation is affected primarily by superficial gas velocity Secondary effects are due to: liquid physical properties; column diameter and; solids concentration Heat exchange tubes do not affect significantly gas holdup and liquid recirculation profiles Gas distributor does has minimum effect gas holdup and liquid velocity in fully developed region Gas holdup is not affected by pressure in bubbly regime but it rises with pressure in churn-turbulent regime and becomes increasing parabolic Correlations have been developed for the gas holdup, liquid velocity and eddy diffusivity radial profiles Future work Data base extension to higher pressure and temperature Experiments at low H/Dc to identify sparger with most desirable properties New models need to be proposed as to which variable is dominant one that governs the establishment of gas holdup and liquid velocity profile

Download ppt "Data Base Expansion for Bubble Column Flows reported for DOE in period from 1995 to 2001 & summarized by Peter Spicka."

Similar presentations

Proto-Planetary Disk and Planetary Formation

Proto-Planetary Disk and Planetary Formation
Chapter 2 Introduction to Heat Transfer

Chapter 2 Introduction to Heat Transfer
Master’s Dissertation Defense Carlos M. Teixeira Supervisors: Prof. José Carlos Lopes Eng. Matthieu Rolland Direct Numerical Simulation of Fixed-Bed Reactors:

Master’s Dissertation Defense Carlos M. Teixeira Supervisors: Prof. José Carlos Lopes Eng. Matthieu Rolland Direct Numerical Simulation of Fixed-Bed Reactors:
DIFFUSION MODELS OF A FLUIDIZED BED REACTOR Chr. Bojadjiev Bulgarian Academy of Sciences, Institute of Chemical Engineering, “Acad. G.Bontchev” str.,

DIFFUSION MODELS OF A FLUIDIZED BED REACTOR Chr. Bojadjiev Bulgarian Academy of Sciences, Institute of Chemical Engineering, “Acad. G.Bontchev” str.,
Boundary Layer Flow Describes the transport phenomena near the surface for the case of fluid flowing past a solid object.

Boundary Layer Flow Describes the transport phenomena near the surface for the case of fluid flowing past a solid object.
Nozzle Study Yan Zhan, Foluso Ladeinde April, 2011.

Nozzle Study Yan Zhan, Foluso Ladeinde April, 2011.
MUTAC Review April 6-7, 2009, FNAL, Batavia, IL Mercury Jet Target Simulations Roman Samulyak, Wurigen Bo Applied Mathematics Department, Stony Brook University.

MUTAC Review April 6-7, 2009, FNAL, Batavia, IL Mercury Jet Target Simulations Roman Samulyak, Wurigen Bo Applied Mathematics Department, Stony Brook University.
CHEMICAL REACTION ENGINEERING LABORATORY Data Base Expansion for Bubble Column Flows Data Base Expansion for Bubble Column Flows reported for DOE in period.

CHEMICAL REACTION ENGINEERING LABORATORY Data Base Expansion for Bubble Column Flows Data Base Expansion for Bubble Column Flows reported for DOE in period.
Real Reactors Fixed Bed Reactor – 1

Real Reactors Fixed Bed Reactor – 1
PERFORMANCE STUDIES OF TRICKLE BED REACTORS

PERFORMANCE STUDIES OF TRICKLE BED REACTORS
University of South Carolina FCR Laboratory Dept. of Chemical Engineering By W. K. Lee, S. Shimpalee, J. Glandt and J. W. Van Zee Fuel Cell Research Laboratory.

University of South Carolina FCR Laboratory Dept. of Chemical Engineering By W. K. Lee, S. Shimpalee, J. Glandt and J. W. Van Zee Fuel Cell Research Laboratory.
California State University, Chico

California State University, Chico
Suspended Load Above certain critical shear stress conditions, sediment particles are maintained in suspension by the exchange of momentum from the fluid.

Suspended Load Above certain critical shear stress conditions, sediment particles are maintained in suspension by the exchange of momentum from the fluid.
CHE/ME 109 Heat Transfer in Electronics

CHE/ME 109 Heat Transfer in Electronics
Fixed bed and fluidized bed

Fixed bed and fluidized bed
Convection Prepared by: Nimesh Gajjar. CONVECTIVE HEAT TRANSFER Convection heat transfer involves fluid motion heat conduction The fluid motion enhances.

Convection Prepared by: Nimesh Gajjar. CONVECTIVE HEAT TRANSFER Convection heat transfer involves fluid motion heat conduction The fluid motion enhances.
CHEMICAL REACTION ENGINEERING LABORATORY Characterization of Flow Patterns in Stirred Tank Reactors (STR) Aravind R. Rammohan Chemical Reaction Engineering.

CHEMICAL REACTION ENGINEERING LABORATORY Characterization of Flow Patterns in Stirred Tank Reactors (STR) Aravind R. Rammohan Chemical Reaction Engineering.
SURVIVAL MODE Quiz 3 – 2013.11.29.

SURVIVAL MODE Quiz 3 –
1 CREL meeting 2004 CFD Simulation of Fisher-Tropsch Synthesis in Slurry Bubble Column By Andrey Troshko Prepared by Peter Spicka Fluent Inc. 10 Cavendish.

1 CREL meeting 2004 CFD Simulation of Fisher-Tropsch Synthesis in Slurry Bubble Column By Andrey Troshko Prepared by Peter Spicka Fluent Inc. 10 Cavendish.
Mechanistic Modeling and CFD Simulations of Oil-Water Dispersions in Separation Components Mechanistic Modeling and CFD Simulations of Oil-Water Dispersions.

Mechanistic Modeling and CFD Simulations of Oil-Water Dispersions in Separation Components Mechanistic Modeling and CFD Simulations of Oil-Water Dispersions.

Similar presentations

Ads by Google