1. March 2017
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: LiFi / CamCom Technology Based Military Vehicle Command Auxiliary System
Date Submitted: July 2018
Source: Jaesang Cha, Minwoo Lee, Vinayagam Mariappan (SNUST), Sangwoon Lee(Namseoul Univ.), Sooyoung Chang (SYCA)
Address: Contact Information: , FAX: ,
Re:
Abstract: This documents introduce the V2V LiFi / CamCom link design consideration for VAT. This proposed LiFi / CamCom link model for military vehicle command auxiliary system. This VAT solution can be used on the application services like ITS, ADAS, IoT/IoL, LED ID, digital signage with connected information services etc. on road condition.
Purpose: To provided concept models of Light Communication based LiFi/CamCom solution for Vehicular Assistant Technology (VAT) Interest Group
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Slide 1
Submission

2. Contents Needs for Military Vehicle Command Auxiliary System
March 2017
Contents
Needs for Military Vehicle Command Auxiliary System
LiFi / CamCom Technology for Military Vehicle Command Auxiliary System
Conclusion
Slide 2
Submission

3. Needs for Military Vehicle Command Auxiliary System
March 2017
Needs for Military Vehicle Command Auxiliary System
Military Vehicle Command Auxiliary System
Currently, the military shooting command system for launching rockets is carried out by simple RF communication or hand-signal.
In army, RF communication uses a simple frequency hopping basis. This has the problem of being vulnerable and vulnerable to enemy forces.
Basic Concept
LiFi / CamCom based fire command auxiliary system can be used to secure launching rockets.
Uses the lighting system installed in the infrastructure and military vehicle built-in camera to design the LiFi / CamCom Link
< Multiple Rocket Launcher System >
GOOGLE
Slide 3
Submission

4. LiFi / CamCom Link for Military Vehicle Auxiliary System
March 2017
LiFi / CamCom Link for Military Vehicle Auxiliary System
LiFi / CamCom Link for Military Vehicle Command Auxiliary System
Tx : Vehicle Hear/Rear Light
Rx : PD / Vehicle Hear/Rear camera
Modulations :
OOK, VPPM, Offset-VPWM, Multilevel PPM, Inverted PPM, Subcarrier PPM, DSSS SIK etc.
Day-Night Communication Mode
Data Rate : 10K ~ 2Mb/s
Supported LoS(Line of Sight)
Available Distance : 10m ~ 100m
Fire Direction Data Tx
Head/Rear Light Rx
Head/Rear camera
※ Using a vehicle light from a commanding vehicle, it directs a firing command directed at the launch vehicle and the firing vehicle uses a front / rear camera to issue a firing command.
< Military Vehicle Command Auxiliary System LiFi CamCom Link >
Slide 4
Submission

5. March 2017
Conclusion
Proposed the LiFi / CamCom Technology Based Military Vehicle Command Auxiliary System.
Uses the front / rear camera is used as the receiver, and the front / back light is used as the transmitter of Military Vehicle
Provide the secure military vehicle command execution compared to conventional military communication methods and also has the advantage of being able to reduce the shooting preparation time by enabling the execution of the shooting command on the move.
Slide 5
Submission