Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 1 Introduction to Electronics

Published byMartina Farmer Modified over 5 years ago

Similar presentations

Presentation on theme: "Chapter 1 Introduction to Electronics"— Presentation transcript:

1 Chapter 1 Introduction to Electronics

2 PN Junction - Diode Current Flow

3 Bipolar Junction Transistor: BJT
Emitter Base Collector

4 Field Effect Transistor: FET
S = Source G = Gate D = Drain

5 Passive and Active Components
Passive Components: Do no require/depend on power supply for its operation or the device which electrical characteristics does not depend on the power supply Examples: Resistor, capacitor, inductor Active components: Do require/depend on power supply for its operation or the device which electrical characteristics depend on the power supply Examples: Transistors such as BJT and FET

6 Electronic Circuits An electronic circuit generally contains both the passive and active components. Therefore a dc power supply is essential for the operation of its active components. An electronic processing or amplifier devices also need different power source than its DC operating power source called input signal. This input signal characteristics and power can be modified by the electronic circuit with the presence of its DC operating power supply. The processed input signal which is obtained from the electronic circuit is called output signal. Block diagram of an electronic circuit (Amplifier)

7 Analog and Digital Signals
An electrical signal is a time varying voltage or current which bears the information by altering the characteristics of the voltage or current. In an analog signal the characteristics of the voltage or current which represents the information can be any value. Analog signal Digital signal must have discrete value, it is said quantization. In a digital signal the characteristics of the voltage or current which represents the information has only two values and sometimes it is called binary signal. Digital signal

8 Representation of Signal
A sinusoidal voltage when it is superimposed on a DC voltage can be represented as Sinusoidal voltage superimposed on dc voltage VBEQ

9 DEFINITION vBE Total = (DC + AC) VBE DC Component vbe AC Component

Download ppt "Chapter 1 Introduction to Electronics"

Similar presentations

Basic Electronics Ninth Edition Grob Schultz

Basic Electronics Ninth Edition Grob Schultz
Differential Amplifiers and Integrated Circuit (IC) Amplifiers

Differential Amplifiers and Integrated Circuit (IC) Amplifiers
Bipolar Junction Transistors: Operation, Circuit Models, and Applications AC Power CHAPTER 10.

Bipolar Junction Transistors: Operation, Circuit Models, and Applications AC Power CHAPTER 10.
Transistors These are three terminal devices, where the current or voltage at one terminal, the input terminal, controls the flow of current between the.

Transistors These are three terminal devices, where the current or voltage at one terminal, the input terminal, controls the flow of current between the.
Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.

Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.
Module 2: Part 2 Basic BJT Amplifiers. Learning Objectives After studying this module, the reader should have the ability to: n Explain graphically the.

Module 2: Part 2 Basic BJT Amplifiers. Learning Objectives After studying this module, the reader should have the ability to: n Explain graphically the.
Experiment 6 -- Digital Switching

Experiment 6 -- Digital Switching
© Electronics ECE 1312 Taaruf Nor Farahidah Za’bah Room number : E2-2-13.12 Phone number : 03-6196 4562 address : 

© Electronics ECE 1312 Taaruf Nor Farahidah Za’bah Room number : E Phone number : address : 
1 KMUTT: S. Srakaew CPE 221 Introduction What is “Electronics”? Electric circuit Connections of conductive wires and passive devices Electronics circuit.

1 KMUTT: S. Srakaew CPE 221 Introduction What is “Electronics”? Electric circuit Connections of conductive wires and passive devices Electronics circuit.
Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 20.1 Field-Effect Transistors  Introduction  An Overview of Field-Effect.

Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 20.1 Field-Effect Transistors  Introduction  An Overview of Field-Effect.
Recall Last Lecture Biasing of BJT Applications of BJT

Recall Last Lecture Biasing of BJT Applications of BJT
Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 21.1 Bipolar Transistors  Introduction  An Overview of Bipolar Transistors.

Storey: Electrical & Electronic Systems © Pearson Education Limited 2004 OHT 21.1 Bipolar Transistors  Introduction  An Overview of Bipolar Transistors.
Electronic Circuit Analysis and Design Second Edition

Electronic Circuit Analysis and Design Second Edition
Spencer/Ghausi, Introduction to Electronic Circuit Design, 1e, ©2003, Pearson Education, Inc. Chapter 7, slide 1 Introduction to Electronic Circuit Design.

Spencer/Ghausi, Introduction to Electronic Circuit Design, 1e, ©2003, Pearson Education, Inc. Chapter 7, slide 1 Introduction to Electronic Circuit Design.
Transistors Three-terminal devices with three doped silicon regions and two P-N junctions versus a diode with two doped regions and one P-N junction Two.

Transistors Three-terminal devices with three doped silicon regions and two P-N junctions versus a diode with two doped regions and one P-N junction Two.
Chapter 6. Bipolar Junction Transistors (BJTs). Bipolar Junction Transistor Three terminal device Voltage between two terminals to control current flow.

Chapter 6. Bipolar Junction Transistors (BJTs). Bipolar Junction Transistor Three terminal device Voltage between two terminals to control current flow.
Transistors By Virus. Safety Remove all jewelry and watches Wear safety glasses Unplug power plug when placing hands inside live equipment. Wear static.

Transistors By Virus. Safety Remove all jewelry and watches Wear safety glasses Unplug power plug when placing hands inside live equipment. Wear static.
Electronics Involves the use of devices and circuits to control the flow of electric current to achieve some purpose. These circuits contain: Resistors,

Electronics Involves the use of devices and circuits to control the flow of electric current to achieve some purpose. These circuits contain: Resistors,
MAE156A October 12, 2006 UCSD H. Ali Razavi.  Electric voltage is similar to height difference: - Electrons start moving under voltage difference - Unless.

MAE156A October 12, 2006 UCSD H. Ali Razavi.  Electric voltage is similar to height difference: - Electrons start moving under voltage difference - Unless.
4-1 McGraw-Hill Copyright © 2001 by the McGraw-Hill Companies, Inc. All rights reserved. Chapter Four Basic BJT Amplifiers.

4-1 McGraw-Hill Copyright © 2001 by the McGraw-Hill Companies, Inc. All rights reserved. Chapter Four Basic BJT Amplifiers.

Similar presentations

Ads by Google