1. Unit 11 Free Energy Lecture Presentation
© 2015 Pearson Education, Inc.

2. Warm Up TAKE OUT: All Assignments due today (19.1-19.7, Video Notes)
SHOW ME: For stamp
THEN: Get your lab notebook (did not have a chance to grade them)
TIME: 3 MINUTES
WHEN DONE: Get Lecture Notes, ChemQuest due on “Wednesday”, Friday, and Tuesday (at front of room)

3. Agenda Lecture Notes (18 min) Practice Problems Lecture Notes (10 min)
Work Time
Set Up Mini-Lab

4. First Law of Thermodynamics
You will recall from Chapter 5 that energy cannot be created or destroyed.
Therefore, the total energy of the universe is a constant.
Energy can, however, be converted from one form to another or transferred from a system to the surroundings or vice versa.

5. Enthalpy/Entropy
Enthalpy is the heat absorbed by a system during a constant-pressure process.
Entropy is a measure of the randomness in a system.
Both play a role in determining whether a process is spontaneous.

6. Spontaneous Processes
Spontaneous processes proceed without any outside assistance.
The gas in vessel A will spontaneously effuse into vessel B, but it will not spontaneously return to vessel A.
Processes that are spontaneous in one direction are nonspontaneous in the reverse direction.

7. Experimental Factors Affect Spontaneous Processes
Temperature and pressure can affect spontaneity.
An example of how temperature affects spontaneity is ice melting or freezing.

8. Reversible and Irreversible Processes
Irreversible processes cannot be undone by exactly reversing the change to the system or cannot have the process exactly followed in reverse. Also, any spontaneous process is irreversible!
Reversible process: The system changes so that the system and surroundings can be returned to the original state by exactly reversing the process. This maximizes work done by a system on the surroundings.

9. Entropy
Entropy can be thought of as a measure of the randomness of a system.
It is a state function:
It can be found by heat transfer from surroundings at a given temperature:

10. Second Law of Thermodynamics
The entropy of the universe increases in any spontaneous processes.
This results in the following relationships:

11. Entropy on the Molecular Scale
Boltzmann described entropy on the molecular level.
Gas molecule expansion: Two molecules are in the apparatus above; both start in one side. What is the likelihood they both will end up there? (1/2)2
If one mole is used? (1/2)6.02×1023! (No chance!)
Gases spontaneously expand to fill the volume given.
Most probable arrangement of molecules: approximately equal molecules in each side

12. Statistical Thermodynamics
Thermodynamics looks at bulk properties of substances (the big picture).
We have seen what happens on the molecular scale.
How do they relate?
We use statistics (probability) to relate them. The field is called statistical thermodynamics.
Microstate: A single possible arrangement of position and kinetic energy of molecules

13. Boltzmann’s Use of Microstates
Because there are so many possible microstates, we can’t look at every picture.
W represents the number of microstates.
Entropy is a measure of how many microstates are associated with a particular macroscopic state.
The connection between the number of microstates and the entropy of the system is:

14. Entropy Change
Since entropy is a state function, the final value minus the initial value will give the overall change.
In this case, an increase in the number of microstates results in a positive entropy change (more disorder).

15. Effect of Volume and Temperature Change on the System
If we increase volume, there are more positions possible for the molecules. This results in more microstates, so increased entropy.
If we increase temperature, the average kinetic energy increases. This results in a greater distribution of molecular speeds. Therefore, there are more possible kinetic energy values, resulting in more microstates, increasing entropy.

16. Molecular Motions Molecules exhibit several types of motion.
Translational: Movement of the entire molecule from one place to another
Vibrational: Periodic motion of atoms within a molecule
Rotational: Rotation of the molecule about an axis
Note: More atoms means more microstates (more possible molecular motions). 

17. Entropy on the Molecular Scale
The number of microstates and, therefore, the entropy tend to increase with increases in
temperature.
volume.
the number of independently moving molecules.

18. Entropy and Physical States
Entropy increases with the freedom of motion of molecules.
S(g) > S(l) > S(s)
Entropy of a system increases for processes where
gases form from either solids or liquids.
liquids or solutions form from solids.
the number of gas molecules increases during a chemical reaction.

19. Third Law of Thermodynamics
The entropy of a pure crystalline substance at absolute zero is 0.
Consider all atoms or molecules in the perfect lattice at 0 K; there will only be one microstate.
S = k ln W = k ln 1 = 0

20. Standard Entropies
The reference for entropy is 0 K, so the values for elements are not 0 J/mol K at 298 K.
Standard molar enthalpy for gases are generally greater than liquids and solids. (Be careful of size!)
Standard entropies increase with molar mass.
Standard entropies increase with number of atoms in a formula.

21. S° = nS°(products) – mS°(reactants)
Entropy Changes
Entropy changes for a reaction can be calculated in a manner analogous to that by which H is calculated:
S° = nS°(products) – mS°(reactants)
where n and m are the coefficients in the balanced chemical equation.

22. Entropy Changes in Surroundings
Heat that flows into or out of the system changes the entropy of the surroundings.
For an isothermal process
At constant pressure, qsys is simply H° for the system.

23. Entropy Change in the Universe
The universe is composed of the system and the surroundings.
Therefore,
Suniverse = Ssystem + Ssurroundings
For spontaneous processes
Suniverse > 0

24. Total Entropy and Spontaneity
ΔSuniverse = ΔSsystem + ΔSsurroundings
Substitute for the entropy of the surroundings:
ΔSuniverse = ΔSsystem – ΔHsystem/T
Multiply by −T:
−TΔSuniverse = −TΔSsystem + ΔHsystem
Rearrange:
−TΔSuniverse = ΔHsystem − TΔSsystem
Call −TΔSuniverse the Gibbs Free Energy (ΔG):
ΔG = ΔH − T ΔS

25. Gibbs Free Energy
If DG is negative, the forward reaction is spontaneous.
If DG is 0, the system is at equilibrium.
If G is positive, the reaction is spontaneous in the reverse direction.

26. Standard Free Energy Changes
Analogous to standard enthalpies of formation are standard free energies of formation, Gf°:
where n and m are the stoichiometric coefficients.

27. Free Energy Changes How does ΔG change with temperature? ΔG = ΔH – TΔS
Since reactions are spontaneous if ΔG < 0, the sign of enthalpy and entropy and the magnitude of the temperature matters to spontaneity.

28. Free Energy Changes

30. Free Energy and Equilibrium
Under any conditions, standard or nonstandard, the free energy change can be found this way:
G = G° + RT ln Q
(Under standard conditions, concentrations are 1 M, so Q = 1 and ln Q = 0; the last term drops out.)

31. Free Energy and Equilibrium
At equilibrium, Q = K, and G = 0.
The equation becomes
0 = G° + RT ln K
Rearranging, this becomes
G° = RT ln K or
K = e
G/RT

32. Which process is not spontaneous at 25 degrees Celsius?
the melting of an ice cube
the sublimation of dry ice
the boiling of liquid nitrogen
the freezing of ethyl alcohol
Answer: d

33. All spontaneous processes are
reversible.
isothermal.
irreversible.
d. exothermic.
Answer: c

34. Entropy is a measurement of the _______ of a system.
randomness
internal energy
temperature
polarity
Answer: a

35. Entropy (S) is a state function, so the change in entropy is given by Sfinal _____ Sinitial.+ − ×
d. /
Answer: b

36. The entropy of a sample of CO2 increases upon heating because all three types of molecular motion increase.
True
False
Answer: a

37. The entropy of a sample of Ne increases upon heating because all three types of molecular motion increase.
True
False
Answer: b

38. increases decreases remains unchanged d. reaches equilibrium
The Second Law of Thermodynamics says that the entropy of the universe _______ whenever a spontaneous process occurs.
increases
decreases
remains unchanged
d. reaches equilibrium
Answer: a

39. kinetic rotational vibrational translational
An automobile being driven from west to east is experiencing _______ motion.
kinetic
rotational
vibrational
translational
Answer: d

40. kinetic rotational vibrational translational
Changes in a molecule’s bond lengths or bond angles are examples of _______ motion.
kinetic
rotational
vibrational
translational
Answer: c

41. When a molecule spins like a top, it is undergoing _______ motion.
kinetic
vibrational
translational
rotational
Answer: d

42. S = k × W S = k / W S = k ln W d. S = kW
k = Boltzmann constant. W = the number of microstates. S = entropy. Which is true?
S = k × W
S = k / W
S = k ln W
d. S = kW
Answer: c

43. Entropy decreases when
a liquid becomes a gas.
a solid becomes a liquid.
a gas becomes a solid.
d. the number of moles of gas increases.
Answer: c

44. Which process does not illustrate a decrease in entropy?
Na(s) + Br2(l)  2 NaBr(s)
CaCO3(s)  CaO(s) + CO2(g)
NH3(aq) +H2S(g) (NH4)2S(aq)
AgNO3(aq) + KCl(aq) 
AgCl(s) + KNO3(aq)
Answer: b

45. increasing b. decreasing c. infinite d. zero
The Third Law of Thermodynamics says that the entropy of a pure, perfect crystal is _______ at absolute zero (zero Kelvins).
Answer: d
increasing b. decreasing
c. infinite d. zero

46. Which is not a standard condition for reporting Standard Free Energy values?
is 0 for pure liquids and solids, regardless of their state.
is reported for solutions at 1 M.
is reported for gases at 1 atm.
is 0 for pure elements in their standard states.
Answer: a

47. G = H + TS G = H − TS G = H × TS G = H / TS
G = the Gibbs free energy. H = enthalpy. S = entropy. T = the Kelvin temperature. Which is true?
G = H + TS
G = H − TS
G = H × TS
G = H / TS
Answer: b

48. If the enthalpy change is positive and the entropy change is negative, the reaction is
spontaneous at all temperatures.
non-spontaneous at all temperatures.
spontaneous at low temperatures.
spontaneous at high temperatures.
Answer: b

49. If the enthalpy change is negative and the entropy change is positive, the reaction is
spontaneous at all temperatures.
non-spontaneous at all temperatures.
spontaneous at low temperatures.
d. spontaneous at high temperatures.
Answer: a

50. At equilibrium, the value of the free energy change (“delta G”) is
positive.
negative.
fluctuating.
d. zero.
Answer: d

51. The general equation used to calculate ΔGrxn from standard free energies of formation is ΔGrxn =
ΔHrxn − T ΔSrxn.
Σn(ΔGf)products −Σ n(ΔGf)reactants.
Σn(ΔGf)reactants −Σ n(ΔGf)products.
d. ΔGf − RT lnQ.
Answer: b

52. Work Time COMPLETE: Mini-Lab SetUp or ChemQuests due “Wed” or Friday
TIME: Until 9:44
WHEN DONE: Work on any other assignments for this unit