1. GLAST Large Area Telescope:
Gamma-ray Large Area Space Telescope
GLAST Large Area Telescope:
Mechanical Systems Peer Review
March 27, 2003
Section Introduction
Marc Campell
SLAC
Mechanical Systems Mgr.

2. Agenda 1. Introduction 1.1 Management 8:00 AM 0:15 M. Campell
1.2 Schedule 8:15 AM 0:20 M. Campell
2. Systems Engineering
2.1 Requirements & Compliance 8:35 AM 0:20 L. Lee
2.2 Budgets & Metrics 8:55 AM 0:15 L. Lee
2.3 Risk List 9:10 AM 0:20 M. Campell
3. Design Overview
3.1 Overview 9:30 AM 0:30 M. Campell
3.2 Changes since Delta PDR 10:00 AM 0:15 M. Campell
-Break :15 AM 0:15
4. Thermal Systems Design
4.1 Radiator Design 10:30 AM 0:15 J. Cernac
4.2 Radiator Structural Analysis 10:45 AM 0:15 P. Sharifi
4.3 Radiator Thermal Design 11:00 AM 0:30 L. Osborne
-Lunch Break :30 AM 1:00
4.4 Heat Pipe Thermal Design 12:30 PM 0:15 A. Avallon
4.5 XLAT Design & Structural Analysis 12:45 PM 0:15 L. Sokolsky
4.6 X-LAT Thermal Analysis 1:00 PM 0:15 B. Yendler
4.7 Fabrication & Verification Plans 1:15 PM 0:30 B. Costanzo
5. Grid Box Design
5.1 Grid Box Base Assembly 1:45 PM 0:30 M. Campell
5.2 Engineering Modeling 2:15 PM 0:30 M. Campell/G. Lam
5.3 Fabrication & Assembly Plans 2:45 PM 0:30 B. Olson
-Break- 3:15 PM 0:15
6. Subsystem Verification Test Plans
6.1 Verification Test Plans & Flow 3:30 PM 0:30 L. Lee
7. Parts Analysis
7.1 Stress Analysis 4:00 PM 0:15 M. Campell
8. Summary
8.1 Further Work 4:15 PM 0:10 M. Campell
8.2 Conclusions 4:25 PM 0:10 M. Campell

3. Mechanical Subsystems Overview
Grid Assembly
Grid Box Assembly +Z
Mid-Plate
X-LAT Plate Assy +Z
SC “wings”
Radiator Mount Bracket
EMI Shields

4. Radiator Placement +Z +Z

5. Key Mechanical Systems Requirements