1. Vibration & Temperature Sensor

2. Contents Why monitor vibration? Monitor a wide range of machines
Vibration measurements
Set alarm levels
Mounting options
Select a Node
Select thresholds
Battery life
Models
Specifications

3. Why Monitor Vibration? Predictive maintenance
Vibration is often the result of components that are:
Imbalanced
Misaligned
Worn
Loose
Improperly driven
Detecting increased vibration early helps reduce machine damage and avoid failures
Monitoring vibration reduces downtime
Plan maintenance more efficiently
Monitor machine run time

4. Monitor a Wide Variety of Machines
Motors
Pumps
Compressors
Fans
Blowers
Gear boxes

5. Vibration Measurements
RMS Velocity
RMS (root-mean-square) velocity is an indication of the vibration energy produced by the machine.
Expressed in inches per second (in/s) or millimeters per second (mm/s)
RMS velocity is used in the ISO vibration severity chart

6. Set Alarm Levels
Set vibration alarms based on the ISO vibration severity chart
Set temperature alarms up to 80°C

7. Mounting Options Standard bracket Magnet bracket
(ships with sensor)
Magnet bracket
Two sided thermal transfer mounting tape

8. Mounting

9. Select Node* Q45 P6 Performance H6 Multihop
Easily connect to vibration sensor using the 5-pin M12 Euro connector
Set thresholds using DIP switches
Built in LED light is pre-mapped to illuminate amber when the vibration threshold has been exceeded and red when the temperature threshold has been exceeded
2.4 GHz
P6 Performance
LCD display
Star topology allows for up to 47 monitoring points
Available in 900 MHz (1 Watt) and 2.4 GHz
H6 Multihop
Tree topology allows for multiple hops to cover longer distances and circumvent obstacles
*Vibration sensor must be paired with a Banner Wireless Node

10. Select Vibration Threshold
Vibration thresholds are DIP switch selectable on the Q45
Use UCT to set the temperature threshold and vibration thresholds for the P6 and H6
Description
DIP Switches 1 2 3 4
Vibration alarm at 0.15 in/sec (default setting) ON
OFF
Vibration alarm at 0.25 in/sec
Vibration alarm at 0.35 in/sec
Vibration alarm at 0.55 in/sec
Local light disabled (conserves battery)
UCT configurable

11. Battery Life
Q45:
P6 and H6:

12. Models 1- Wire Serial Models Description Models Description Frequency
QM42VT1
Vibration & temperature sensor with 1-wire Serial interface
Models
Description
Frequency
DX80N2Q45VT
Q45 Vibration/temp node
2.4 GHz
DX80N9X1S-P6
1-wire Serial Performance node
900 MHz
DX80N2X1S-P6
DX80DR9M-H6
1-wire Serial Modbus MultiHop Slave
DX80DR2M-H6

13. Vibration Sensor Specifications
Supply Voltage
3.6 to 5.5 V dc
Current
Active comms: mA at 5.5 V dc
Mounting Threads
M12 x 1
Indicators
Green flashing: Power ON
Amber flicker: Serial Tx
Vibration
Mounted base resonance: 5.5 kHz nominal
Measuring range: 0 – 65 mm/sec or 0 – 6.5 in/sec RMS
Frequency range: 10 – 1000 Hz
Accuracy: ± °C
Temperature
Measuring range: -40 °C to +105 °C (-40 °F to +221 °F)
Resolution: 0.1 °C
Accuracy: ±3 °C
Environmental Rating
NEMA 6P, IEC IP67
Shock
400g