1. PASTE A PICTURE RELATED TO YOUR PROJECT
Project Title

2. Electronic Engineering
GROUP MEMBERS
STUDENT NAME
CMS ID
Student 1
00000
Student 2
Student 3
Student 4
SUPERVISOR
SUPERVISOR NAME
DEPARTMENT
Supervisor
Electronic Engineering 2

3. Outline Motivation Introduction Literature Review Problem Statement
Project/Research Objectives
Methodology
Results and Discussion
Applications and Limitations
Conclusion and Future Work
Project Work Load
Gantt Chart
References 3

4. Motivation
Why this area for work, start with the motivation behind. 4

5. Introduction Introduce the system you are working on.
You can use a block diagram, flow chart or circuit diagrams. 5

6. Literature Review
Properly define state of the art resent techniques exist.
The literature should be purely research papers.
No internet Wikipedia like links
Standard Books can also be referred in this section. 6

7. Problem Statement
Problem statement should include the problem you are solving (for which you are making this project). 7

8. Objectives Clearly state the objective of your FYP
The objectives should be 2 to 3 for a FYP presentation
The objectives may very in case of research based projects 8

9. Methodology Clearly state the proposed methodology
The method should have a proposed block diagram, flow chart, flow diagram or steps in which you will make the project.
This section is unique and its all your own. 9

10. Results and Discussion
Clearly state the Results you achieved. 10

11. Applications and Limitations
Clearly state the applications were your project can be used. And also state the limitations which weakens your project. 11

12. Conclusion and Future Work
Clearly state the conclusion of your whole work and also state that what more objectives can be added to you work in future. 12

13. Project Workload GROUP MEMBERS CMS ID TASKS DISTRUBION Student 1 00000
Write the tasks that are assigned
Student 2
To a particular group member.
Student 3
Student 4 13

14. Gantt Chart
This Gantt Chart can be made using Microsoft Project Professional.
A Gantt Chart shows the complete steps involved till the completion of the project along with its time frame. 14

15. References Reference should be in IEEE standard format
You can use Mendeley for citation (referencing) in MS Word…
Watch this Tutorial on youtube 15

16. Thank You 16

17. Note For Presentation Making
SLIDES MUST INCLUDE ALL THE STEPS OF OUTLINE
PRESENTATION MUST CONTAIN SLIDE NUMBERS
PICTURE AND TABLES MUST HAVE CAPTIONS
SHOULD BE PRECISE AND UPTO THE MARK 17