1. EDF expectations regarding Interoperability tests
Eric LAMBERT EDF R&D Charlotte CIMUg 2009
20 novembre novembre 2018
Groupe EDF

2. Topics EDF experience with IOP tests & lessons learned
Needs based on actual CIM EDF Group related projects
ERDF (EDF Distribution Subsidiary) CIM roadmap and CIM roadmap for 61968
Conclusion : IOP tests needs for EDF Group TSO/DSO
November 2009
EDF R&D

3. EDF experience with IOP tests
EDF R&D participated in IOP tests 2004, 2005, 2006
Understanding what was an IOP test (CPSM)
Promoting new needs through networks modelized in CIM CIM for UCTE network (anticipation for European TSOs) CIM for Distribution need (anticipation for CDPSM profile)
Participating implied to provide software with CIM APIs
EDF R&D participated in IOP tests 2009 for TSO needs in Europe
EDF R&D provided converters from old UCTE format to the new CIM profile that TSOs in Europe defined through UCTE and IEC Task force
November 2009
EDF R&D

4. EDF lessons learned & needs
Time consuming effort : it has a non negligeable cost
Tools used recently have facilitated the process : hopefully these tools were mostly free of use
An IOP test must be defined according to a Standard part It’s the only proof to demonstrate that the standard is implemented and useful That’s aligned with wg14 roadmap : an IOP test for each part
No networks clearly identified that could be re-used consistently through IOP tests These should be clearly identified and managed through IOP tests
IOP tests must be planned in advance with scope, objectives and participants. Based on this we can schedule them and dedicate resources to them. Stakeholders have to be identified clearly.
November 2009
EDF R&D

5. Interface Reference Model Status
Part 1 : Architecture & general requirements
Part 2 : Glossary NO
Network
Operations AM
Asset
Management OP
Operationnal
Planning &
Optimisation MC
Maintenance &
construction
EMS
Energy
Management
RET
Retail SC
Supply
Chain
Interface
part 3
Interface
part 4
Interface part 5
Interface part 6
Interface part 10
Interface part 10
Interface part 10
IEC compliant middleware services
Interface part 7
Interface part 8
Interface part 9
Interface part 10
Interface part 10
Interface part 10
Interface part 10 NE
Network
Extension
planning CS
Customer
Support MR
Meter
Reading
ACT
Customer
Account
Management
FIN
Financial
PRM
Premises HR
Human
Resources
Part 11 : CIM for DMS
Part 13 : CDPSM
International Standard
IS Maintenance
Proposal
Not started
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

6. CIM roadmap for eRDF (1/2)
The first phase of the roadmap identifies the following tasks :
“ Synchronize the distribution network descriptions ”
This phase identifies the exchange between the GIS managing eRDF assets, the remote control system and the future AMM system.
“ Populate and use a quality repository ”
Sharing quality data in a same format.
“ Populate and use a Measurement repository ”
Sharing load and generation data in a same format.
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

7. CIM roadmap for eRDF (2/2)
The second phase of the roadmap identifies the following tasks :
“ Reinforce computer assisted maintenance project ”
“ Dematerialize documents exchanged between remote control system, operation, maintenance ”
“ Reinforce the asset life cycle ”
Equipments tracability
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

8. IEC WG14 ROADMAP (1/2)
2009
Interoperability tests on (FDIS) (CIM Interfaces for Metering) postponed to January => EDF R&D will participate
Interoperability tests on (IS) (Common Distribution Power System Model) december => EDF R&D will participate
CIM Model for Distribution ( ) (CDV) Will be reinforced based on TF discussions
ERDF and edf r&d established a roadmap to implement this approach in its Isystem.
The objective is to propose priorities for data intergation projects : the first one is to synchronize network descriptions, or as you can see reinforce asset life cycle in order to improve traceability.
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

9. IEC WG14 ROADMAP (2/2)
2010
Maintenance cycle on « Interfaces for Network Operation » ( ) review IS and plan IOP tests Maintenance cycle on « Interfaces for Asset Management » ( ) review IS and plan IOP tests
ERDF and edf r&d established a roadmap to implement this approach in its Isystem.
The objective is to propose priorities for data intergation projects : the first one is to synchronize network descriptions, or as you can see reinforce asset life cycle in order to improve traceability.
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

10. The CIM roadmap continuation
SOLFEGE R&D project : generalize CIM-eRDF usage for eRDF operational projects.
Work
planning
AMM
2010
MV/LV
extension
planning
tools
Generating
CIM for Distribution
Power
quality
MSITE
model
growing
2009
Synchronization
Maintenance
management LV
network
MV network
modelling
Today
November 2009
EDF R&D
20 novembre novembre 2018
Groupe EDF

11. Managing CIM-eRDF/CIM versions
Today
CIM
model
versions
next CIM version 14
Official CIM version 13
Have to consider
and anticipate the
next version (14) 12 MV
network
description
GIS and
SCADA
exchanges LV
network
description 11
Maintenance
Power
quality
AMM
GIS and
calculation
codes
exchanges 10
MSITE
model
versions
before MSITE…
1.0
1.1
2.0
2.1
2.2
November 2009
EDF R&D

12. Conclusion : IOP tests needs for EDF
TSO level : CIM/ENTSO-E harmonisation for the Market in Europe
DSO level :
CDPSM profile ( )
Metering interfaces ( )
GIS to DMS interfaces ( , )
Interfaces to planning tools ( )
Interfaces to Work Management systems ( )
Don’t forget : Some IOP tests can concern TSO AND DSO needs ! For instance : planning tools
CIM & Interoperability tests must exist based on CIM/ Models and derived profiles
November 2009
EDF R&D

13. Thanks for your attention ! Eric
November 2009
EDF R&D