1. On Guard Safety Training Student Tutorial

2.
Once on to the login page save to your favourites or bookmark the web page

3. Log in using your school ID and password
If you have not been on to On Guard before your password will be “onguard”

4. Click on the link to add courses

5. Check which course you are in

6. Click on the link to confirm course selection√
Click on the link to confirm course selection

7. Click on the link to enter the course

8. Click on the link to Select the required tool or procedure

9. Click on the link to enter tool resource page

10. Click on the link to enter the Safe Operating Procedure with sound or

11. Click on the link to enter the Safe Operating Procedure without sound

12. Read all of the information carefully

13. Click on the link to Start the Knowledge test

14. By Clicking on the link you are entering a formal contract so read the information carefully

15. Complete the test to pass you need to get 100%
If you make a mistake you need to click on Re-Do Test

16. Once you have achieved 100% this box will appear, click on Ok

17. Click on the link to Generate a certificate or your results will not be recorded

18. Click on the link to return to the tool resource page

19. Click on the link to Select an other tool or procedure

20. Good Luck