Presentation is loading. Please wait.

Presentation is loading. Please wait.

Team 11 Adam Fisher Presented by: Mitchell Quetant Nathan Hammond

Similar presentations


Presentation on theme: "Team 11 Adam Fisher Presented by: Mitchell Quetant Nathan Hammond"— Presentation transcript:

1 Team 11 Adam Fisher Presented by: Mitchell Quetant Nathan Hammond

2 Presentation Overview
Background Information Project Scope First Semester (Design) Second Semester (Manufacturing) Test maneuvers Problems Encountered Possible Improvements 11/15/2018 Team 11 Progress Report

3 Project Background CAPS is researching the development of fully electric ships Developing real time hardware-in-the-loop simulation capabilities for electric ship power systems Navy hopes to be able to create fully electric ships 11/15/2018 Team 11 Progress Report

4 Project Scope Build a display for classroom and tour demonstrations
Given budget of $3000 Will monitor current and voltage changes during dynamic maneuvers 11/15/2018 Team 11 Progress Report

5 First Semester Needs Assessment Engineering Specifications
Concept Generation -Initial Design - Final Design Cost Analysis 11/15/2018 Team 11 Progress Report

6 Needs Assessment 11/15/2018 Team 11 Progress Report

7 Engineering Specifications
11/15/2018 Team 11 Progress Report

8 Initial Design Not maneuverable Required too large of a pump Costly
11/15/2018 Team 11 Progress Report

9 Final Design More cost efficient Lighter and more maneuverable
11/15/2018 Team 11 Progress Report

10 Cost Analysis Projected materials costs were approximately $2300.
Though within the budget, still close to limit. 11/15/2018 Team 11 Progress Report

11 Second Semester Construction of Apparatus Project Components
Final Product 11/15/2018 Team 11 Progress Report

12 Construction of Apparatus
Took approximately two months to build Met with many delays 11/15/2018 Team 11 Progress Report

13 Project Components Tank Wooden Support Pump Motor Piping System
Motor and Drive System 11/15/2018 Team 11 Progress Report

14 Tank 8”x12”x30” Acrylic tank ¼ in wall thickness
Bound using Acrylic solvent 11/15/2018 Team 11 Progress Report

15 Wooden Support Constructed using 2”x4” wood pieces and 2 ½” wood screws 11/15/2018 Team 11 Progress Report

16 Pump Teel 4RJ94 11/2 HP Used for Pools and Spas
Requires 120 volt (typical wall plug) Pumps 160 GPM 8” to 4” Coupler 11/15/2018 Team 11 Progress Report

17 Piping System PVC Schedule 40 pipe and fixtures 4” to 2” Coupler
Valves are orientated strategically to throttle water 11/15/2018 Team 11 Progress Report

18 Motor and Drive System Uses a 12 V DC motor
Drives a 4” metal propeller Propeller weighs approx. ½ lb Supported by wood and aluminum 11/15/2018 Team 11 Progress Report

19 Final Product Eureka!!!! 11/15/2018 Team 11 Progress Report

20 Actual Cost Analysis 11/15/2018 Team 11 Progress Report

21 Test Maneuvers There are five maneuvers for the apparatus
Accelerating Ship Cruising Ship Coasting Ship Ship at Rough Seas 11/15/2018 Team 11 Progress Report

22 Accelerating Ship Cruising Ship Coasting Ship
Simulates the ship at start up Cruising Ship Similar to the accelerating ship maneuver, but adds use of the pump to simulate the ship already in motion Coasting Ship Simulates a ship moving in open water without use propulsion Currently cannot test 11/15/2018 Team 11 Progress Report

23 Ship at Rough Seas Two phases
With aid of the pump Without aid of the pump Simulates a boat in rough seas where the propeller will enter and exit the water 11/15/2018 Team 11 Progress Report

24 Crash-Astern Simulates the effects of going into full reverse while already traveling at full ahead Currently cannot test 11/15/2018 Team 11 Progress Report

25 Test Data 11/15/2018 Team 11 Progress Report

26 11/15/2018 Team 11 Progress Report

27 Problems Encountered Initially did not know everything to order through CAPS Wavered on what kind of pump to use Many unexpected delays in the ordering pipeline 11/15/2018 Team 11 Progress Report

28 Possible Improvements
Connect system to LABView Change to the drive motor Add an automated mechanical lifting system Add a flow meter Change ball valves 11/15/2018 Team 11 Progress Report

29 Acknowledgements Dr. Michael “Mischa” Streurer Anthony Gleaton
Keith Larson Thomas Anthony Cliff Loughmiller Website: 11/15/2018 Team 11 Progress Report

30 Questions? 11/15/2018 Team 11 Progress Report


Download ppt "Team 11 Adam Fisher Presented by: Mitchell Quetant Nathan Hammond"

Similar presentations


Ads by Google