Presentation is loading. Please wait.

Presentation is loading. Please wait.

MAIN 220 Industrial Rigging

Similar presentations


Presentation on theme: "MAIN 220 Industrial Rigging"— Presentation transcript:

1 MAIN 220 Industrial Rigging
Chris Miller 11/15/2018

2 Wire Rope / Slings Objectives
Know difference between Wire and Rope Slings Know definitions of rigging principals 11/15/2018

3 Wire Rope Classification Wire Strength # strands # of wires per strand
IPS EIP EEIP FOR MORE INFO... TCP TRAINING Preparing The Site (319) 11/15/2018

4 Factors Affecting Wire-rope
Bending Sharp Corners Angles of Force Temperature Heating Corrosion and environment 11/15/2018

5 Sling Components P. 36 p. 37 and p. 41 Sling attachments Where Used
Wear Performance Issues FOR MORE INFO... TCP Equipment Installation Lesson 2,3,4 (318) 11/15/2018

6 Fiber Rope and Webbing Slings
Fiber Natural Manila, boat rope Grades 1-3 P.51 Synthetic Nylon Polyester Polypropylene Benefits Length of fiber 11/15/2018

7 Factors Affecting Fiber-Ropes
Sharp Bends Temperature Moisture Chemical Active Environments Fittings and Splices 11/15/2018

8 Fiber Rope and Webbing Slings
Load Capacity for fibers P. 57 color codes Inspecting ropes Heat damage Apparent decomposing Excessive wear Worn Stitching Cuts Tears Punctures Distortion 11/15/2018

9 Industrial Hoists and Cranes
Lesson 5 Chain Hoist P. 67 picture Hook-Suspended Trolley-Suspended Overhead powered Single reeving Double reeving Safety overloading Limit Switches 11/15/2018

10 Principles and Practices
General Practices Properly Trained Rigger familiar with equipment Rigger makes final say on safety If signaling requires only 1 person in charge Everyone as say to stop Before moving determine where it is going Load is free to move, not fastened to ground Be sure everyone is clear of area No shock loading No riding Do not move over where people are working Never Leave suspended Never work under load unless provisions to support are in place Keep hands fingers out of the way 11/15/2018

11 Principles and Practices
Sling Operating Practices Avoid sharp sling angles Do not pull sling from under a load when load is resting on sling Do not leave slings on the ground Slings should be stored properly Repair or remove damaged slings Do not hammer metal mesh slings 11/15/2018

12 Principles and Practices
Turning a Load Most difficult maneuver Consider all options before moving Determine center of gravity Will blocks be required to support load Can use One-hook turn Single-Sling Turn Two-Hook turn P.89 11/15/2018

13 Principles and Practices
Eye Bolts Have pull ratings and must be remembered p.92 Rigging thought Process What is done with load What tools are needed Is capacity enough and adequate How can the hook up be What will happen with path of travel What will happen once load is lifted How will load be stored 11/15/2018

14 Scaffolds and Ladders Eyebolts and Ratings P. 92 picture
Lean against the wall 11/15/2018


Download ppt "MAIN 220 Industrial Rigging"

Similar presentations


Ads by Google