1. Balloting & Handling Negative Votes

2. General Overview of Different Levels of Balloting
The Committee on Standards (COS)
Main Committee Ballot / Society Review
Subcommittee Ballot

3. Balance and Voting vs. Non Voting Status
// 3

4. Balance of Interest User & General Interest Producer ASTM
Technical Committees must be balanced. Ensures no excess influence by any interest group. 4

5. Voting Official Vote
1 official vote per voting interest (organization)
Official Vote applies to percent return, voting on not persuasive motions at a meeting or by ballot, motion to submit an item for ballot, and achieving quorum requirements
Voting Interest – ASTM Regulations voting interest, n—an organization, a subsidiary of an organization, or an unassociated individual member having a distinctly separate interest from any other interest with regard to the scope of a committee or subcommittee.
All are welcome to participate in technical discussions
All members receive a ballot and are eligible to vote on technical issues
All members’ negatives must be considered

6. The Subcommittee Ballot
// 6

7. Subcommittee Ballot Purpose of Subcommittee Ballot New Standards
Major Revisions
See Section 11.1 of ASTM Regulations on Issuance of Subcommittee Ballot
The development of an initial ASTM work product generally occurs at the task group level. During this phase, an electronic work item is registered and displayed on a public section of the ASTM Web site showing the scope and timing of the effort.
Following this drafting stage, the formal balloting process begins.
All new standards and major revisions to existing standards must undergo at least one subcommittee ballot cycle before moving forward.

8. Subcommittee Ballot Qualifications
Authorization of Subcommittee Ballots
Sub chairman
Motion at Meeting
Ballot Open for Minimum of 30 Days
Qualifications for Valid Subcommittee Ballot – 60% return and 2/3 affirmative
All ballot items must include a rationale
Late ballot returns forwarded for information only
Subcommittee ballots are authorized in one of two ways: by the subcommittee chair, or by motion at a subcommittee meeting. T
The subcommittee level is where the initial review of the item occurs and where the membership is generally most knowledgeable in the topic at hand. At this stage, the author typically learns quickly whether their standards proposal is acceptable to colleagues or if it needs additional work.
In order for a subcommittee ballot to be valid, two statistical requirements must be met: at least 60 percent of voting members must return ballot responses and a two-thirds affirmative rate must be achieved.
The affirmative rate statistic captures the subcommittee’s confidence in the ballot item by determining how many affirmative votes were cast, out of the total of both negative and affirmative votes on the document. Abstentions are not included in this tally.
These requirements ensure that a majority of members have reviewed and support the ballot item. All negatives votes cast on a ballot item must be considered by the subcommittee, which is a concept that we will cover later in this module.

9. Sub Ballot Notification Email
All members on the relevant committee will receive the following notification when a new ballot opens. It is important to add the domain “astm.org” to your white list so that your ballot notifications and other relevant ASTM s do not end up in your spam folder.
If you follow me through the next few slides, I will walk you through how to view a ballot through your MyASTM member page on the website.

10. Viewing a Ballot
Once you have logged into your member account on the website, you will be given choices on your home page. To access all Committee related information, click on MyCommittees.
If you have any open ballots right now, there will be a red box with a number. You can see that in my screen shot in the right hand tool bar under My Outstanding Ballots.
That link is active and can take you directly to the ballot. You can also access the ballot by clicking on ballots under the respective committee.

11. Here is an example of a subcommittee ballot which I am sure is familiar to most of you. This page was recently enhanced with an HTML comment box which will help make your comments much clearer.

12. Writing a Negative
Clearly delineate each objection — if you have concerns with five different parts of a test method, keep them separate, clearly supporting each point
Reference the specific section, paragraph and sentence (where appropriate) to which you object
Be as detailed as possible about the reason for your negative vote
Suggest alternative wording
Clarify points by copying text from the ballot
Separate any comments from your negative that are not intended to be part of your negative
Your negative has to be written in a manner that is stands alone without further explanation required. Subcommittee is only required to act upon the written statement
Call the technical contact to discuss your negative
There is no requirement in ASTM for the technical contact to call/contact the negative voter.

13. The Importance of Being Complete!
Negative Adjudication Options
This Can Happen at a Meeting:
A Technical Contact will Review your Negative
A Motion of Not Persuasive may be made on theNegative
The Rationale of Not Persuasive must be presented
Discussion: At a meeting, there is dialogue and the ability to sometimes provide additional input from both parties and a compromise resolution may be found.
The Vote will be taken
This Can Happen via Online Balloting:
A Technical Contact will review the Negative
Permission to adjudicate via ballot must be given
The negative and the Not Persuasive Rationale are put in the ballot template
There is no opportunity for additional Discussion, your Negative stands completely as written, so be Clear and Complete in your original writings!!!
11/14/2018

14. Submitting an Online Negative

15. We recently enhanced the balloting experience with an HTML box
We recently enhanced the balloting experience with an HTML box. When adding a comment or negative statement, you can now use formatting features such as bold, strike through and so on. We are not quite at the point where the HTML box will accept track changes from the word document but we are definitely heading the right direction. You can also upload a file that contains track changes if you would like.
Another feature to keep in mind is “add another comment” - - this feature is especially great for really long ballot items, such as a brand new standard and you are viewing the entire document. You can now go section by section with your comment instead of grouping into one entire commentary. It is a really great new feature and will definitely help with clarifying and resolving negatives down the road.

16. Subcommittee Ballot Results
Ballot Results Summary
Negatives and Comments are posted online with 24 hour updates
Technical contact is notified when new comments or negatives are available
Subcommittee chairman has access in MyASTM section of web also
Closing Report includes links to all the comments and negatives after the ballot closes
ASTM will generate the ballot results and summarize them in an electronic closing report which will be available several days following the closing date of the ballot. If you voted negative or left a comment with your vote, it does take 24 hours for that to appear.
The closing report contains all ballot item information, including the return and percent affirmative rates, the number of affirmative, negative and abstaining votes cast and the names of all negative voters and commenters.
The full text of all negative votes and comments received for each item is also included in these reports.
If you follow me on the next few slides, I will show you how to access the closing reports.

17. My ASTM
Again - - once you have logged into your MyASTM member area via the ASTM website, click on My Committees. Under the relevant committee, click on Ballots.

18. My Ballots
Click on View Closed Ballots/Closing Reports.

19. Closed Ballots/Closing Report
Here you will be able to view the closing report online or you can download a PDF copy of it.

20. Closing Report – Web Version

21. Closing Report - PDF

22. Negatives
The next two slides are examples of the Negative and Affirmative with Comment PDF’s that you will see on some of your closing reports. It includes the contact information of the voter in case you as the subcommittee chairman or the technical contact need to reach out for clarification.

23. Affirmative with Comments
In this example, you can see the “file attachment”.

24. Six Resolutions of a Negative Vote
Persuasive
Withdrawn
Withdrawn with Editorial Change(s)
Not Related
Not Persuasive
Previously Considered
Bob

25. Choose Insert > Header and Footer to change Date
Persuasive
How is this decision reached?
General Agreement
Lack of a “Not persuasive” motion
A “Not Persuasive” Motion does not receive a Second
A “Not persuasive” motion fails (does not achieve a 2/3 affirmative)
Result of a “Persuasive” Negative
Item is removed from ballot
The system has been cleared to allow for re-balloting
The ballot item may be revised prior to re-balloting
What it does NOT Mean!
Full agreement or a requirement to do exactly what the negative voters wishes
Choose Insert > Header and Footer to change Date

26. Choose Insert > Header and Footer to change Date
Withdrawn
Withdrawn
Withdrawn With Editorial Changes
Withdrawn by the voter
May withdraw negative at any time
Ballot item moves forward
Withdrawn by the voter/agreed as editorial
Editorial change introduces no change in technical content, but corrects typos or reduces ambiguity
After a Subcommittee ballot - If editorial changes are involved, please include for next level of balloting
Choose Insert > Header and Footer to change Date

27. Finding Against the Negative Voter
Not Persuasive
Not Related
Previously Considered
Motion/Second/Rationale
2/3 affirmative vote at a meeting or via ballot
Actions of Subcommittee required to be Upheld by 2/3 affirmative vote at Main Committee meeting or via ballot
Item will move forward to next level of balloting or to publication.
Motion/Second/Rationale
2/3 affirmative vote at a meeting or via ballot
Actions of Subcommittee required to be Upheld by 2/3 affirmative vote at Main Committee meeting or via ballot
Must be treated as an item of New Business
Motion/Second/Rationale
2/3 affirmative vote at a meeting or via ballot
Actions of Subcommittee required to be Upheld by 2/3 affirmative vote at Main Committee meeting or via ballot
There must be clear documentation that the negative was ruled against at a prior subcommittee meeting.
The negative can not contain any new rationales or reasons beyond what was ruled upon prior as NP or NR.
Choose Insert > Header and Footer to change Date

28. Motion for Not Persuasive
The Technical Contact will present the item and will state:
“I make the motion to find XX Not persuasive for the following rationale…”
It is always a motion to find voter not persuasive; never a motion to find voter persuasive.
Must be seconded
Discussion
Chair or Member calls the question
Re-read the Motion rationale
Only those with Official Voting status can vote.
Announce the result and the Vote Count
If the Motion does not receive a second or fails in the vote; the item is removed from ballot with a persuasive negative.
See ASTM Regulations:
Subcommittee Meeting Subcommittee Handling of Negative Votes
Main Committee Meeting Main Committee Handling of Negative Votes
Choose Insert > Header and Footer to change Date

29. Record of Action Taken
Use online negative resolution (ONR) area of the web to document adjudication of negatives
The action taken by the subcommittee must be recorded in the subcommittee minutes
If an item is found Not Persuasive at the subcommittee ballot level, the negative and rationale must accompany the ballot item to main committee ballot

30. Helpful Hints for Officers and Tech Contacts
Documentation is Key!
Address each portion of the negative vote
If possible, put your resolution on a written document (Word or PPT)
Examples:
Use Excel Format for negative votes
Create a Q&A document
Use side-by-side column format
Make sure the minutes accurately reflect the Stated Rationale and Vote Count
Provide editorially revised document when resolving a negative vote as withdrawn with editorial changes
Submit that revised document in online system or to the D02 Editor!
Comments are intended for editorial issues or technical items of new business
Choose Insert > Header and Footer to change Date

31. The Main Committee Ballot
Main committee ballots are much like subcommittee ballots, with a few marked differences.
// 31

32. Initiation of Main Committee Ballots
Submittal Requirements:
For items that had not persuasive negatives on the subcommittee ballot, you must include the following:
Name and affiliation of negative voters
Negative voters statements
Subcommittee negative resolution including rationale
Numerical results of the subcommittee ballot
Open for 30 Days
Simultaneous with Society Review

33. Balloting Subcommittee and Main Committee at the same time
Concurrent Ballots
Balloting Subcommittee and Main Committee at the same time
Used for revisions, withdrawals, or new standards that have undergone at least one subcommittee ballot
Same requirements as Main Committee Ballot
Simultaneous with Society Review
Concurrent ballots are issued for simultaneous sub- and main committee review. This is typically used for minor revisions, reapprovals or new standards that have already gone through the subcommittee ballot at least once.
Concurrent Ballots do require a motion at a meeting or need to have the approval of the subcommittee and main committee chair.

34. Qualifications for Valid Main Committee / Concurrent Ballots
90% Affirmative of Combined Affirmative & Negative Votes
60% Return
Late Ballot Returns
Closing Reports
Final Ballot Results
Disposition of Negatives
Affirmative Votes w/ Comments
Just like the subcommittee ballot, validity is again dependent on two statistical requirements: the 60-percent return rate and an affirmative rate of 90 percent.
The affirmative rate is significantly higher at this level because a main committee ballot is the final level of committee review. The subcommittee should have great confidence at this level that their item will pass successfully and the 90%, if achieved, will support that.
Negative votes cast by both main committee and Society members do need to be considered and are addressed first by the subcommittee and then by the main committee. It is important (and a requirement) that both the subcommittee and the main committee are a part of the resolution of any negative.

35. Society Review In Tandem with Main Committee Ballot
Notifications posted on ASTM Website
Requirements
Disposition of All Negatives
As said before, society review occurs in tandem with the Main and/or Concurrent ballot. The ASTM Web site contains listings of all main committee ballot actions under consideration and all Society members have the opportunity to request any of these ballot items for vote and comment.
If any negatives are received on Society Review, they do need to be addressed by the committee.

36. Society Review
This is an example of what the website shows for each Society Review. New items are displayed each month. Instructions on how to receive or vote on a ballot item is also included on the website.

37. Committee on Standards (COS)
9 Member Group Representing ASTM Committees
Due Process
Appeals Based on Procedural Matters (NOT Technical)
COS Ballot Procedures
Final Approval

38. The Three-Step Approach to Handling Negative Votes
1. COMMUNICATION
2. CONSIDERATION
3. DOCUMENTATION

39. Communication/Consideration/ Documentation
Communication – Meeting agendas, correspondence, direct contact between member & negative voter and other documentation
Consideration –Both subcommittee and main committee at a meeting or via ballot
Documentation – Online negative resolution tool, minutes, correspondence

40. Online Negative Resolution

42. Negatives and Comments
If you click on the name of the Negative Voter, you can view the negative and rationale for the negative vote. When you are ready to resolve the negative, you will click on Enter Disposition.

43. Resolution Options
Here you will select the resolution. Withdrawn with editorial changes does require an editorially revised document.

44. Not Persuasive Ruling
If you decide to enter a not-persuasive ruling, you will need to enter all of the information including the meeting dates, ballot number and item, ruling, ruling rationale and the vote count. If this was strictly a sub ballot, there would not be a main committee vote count included on this page.

45. 14 November 2018

46. Single Vote
14 November 2018

47. Multiple Votes
14 November 2018

48. Example of Multiple Vote Document
14 November 2018

49. Helpful Hints Ballot controversial sections individually
Use good judgment when balloting sections separately
Provide clear and informative cover letter for ballot item(s)
Try to contact the negative voter before the meeting

50. More Hints Address each portion of the negative vote
Provide editorially revised document when resolving a negative vote as withdrawn with editorial changes
Comments are intended for editorial issues or technical items of new business

51. Resources RESOURCES ASTM Member and Officer Training Course
Balloting & Handling Negatives Votes
ASTM Regulations
Committee Officer’s Handbook
Standardization News Articles
When You Do Not Agree: Effective Comments and Negative Votes
About Voting
Getting Positive Results from Negative Votes
Staff Manager – Alyson Fick or

52. Thank you for your attention!