1. Binks Smart Pump

2. Smart Pump Product Line
Electric Smart Pump
E2-20: 5 GPM (260 PSI)
E2-30: 8 GPM (260 PSI)
E4-60: 16 GPM (260 PSI)
E4-90: 24 GPM (203 PSI)

3. Smart Pump Product Line
Accessories:
Low Shear Smart BPR
¾” to 2” Connections
Smart Card:
Automatic controls for “Smart Circ” operation

4. Description E2-20: 5 GPM Fluid Sections CV Drive Section 40:1 Gearbox
1.5 HP AC Motor

5. Description E2-20: 5 GPM CV Cam Slide Rails Cam Follower
Tension Springs
Swivel Joint

6. Description E2-20: 5 GPM AC Motor drives gear box and CV Cam.
Motor Speed (HZ)
Pump CPM
Fluid Flow (GPM) 20
9.8
1.23 25
12.25
1.53 30
14.7
1.84 35
17.25
2.16 40
19.8
2.48 45
22.25
2.79 50
24.7
3.09 55
27.1
3.39 60
29.5
3.69 65
31.85
3.99 70
34.2
4.28 75
36.6
4.58 80 39
4.88
AC Motor drives gear box and CV Cam.
Motor is controlled by inverter with either manual or PLC instruction.
The motor frequency is directly proportional to the Fluid Output!

7. Description E2-30: 8 GPM Main Pump Assembly Main Components
2 HP Motor & Gearbox
Main Cam Shaft and Bearings
2 Cylinders 4 Ball Check
Carriage and Cam Follower
Carriage Support Shaft and Linear Ball Bearing Bushes

8. Description E2-30: 8 GPM 2 HP motor reduced through 56:1 gearbox.
Single “constant velocity” cam & carriage assembly ensures no “hard” connections.
(2) horizontally opposed fluid sections provide 8 GPM fluid output.

9. E2-30 Fluid Section Quick disconnect fluid section.
Internal piston/fluid seal.
Low pressure bellows seal.
“Run to Failure” back up seal.

10. Description E4-60 & E4-90 16 & 24 GPM
Main Pump Assembly
Main Components
5 HP Motor & Gearbox
Main Cam Shaft and Bearings
4 Cylinders 8 Ball Check
Carriage and Cam Follower
Carriage Support Shaft and Linear Ball Bearing Bushes

11. Description E4-60: 15 GPM
Cam area drives (4) horizontal fluid pistons therefore providing a (4) cylinder true positive displacement operating pump.
View showing Min Max Cylinder position

12. Quick Disconnect Fluid Section
“Module” Designed Fluid Section
QD Sanitary Clamp piston shaft connection
Bolted connections
Complete fluid section can be removed by disconnecting (4) sanitary clamps and removal of (8) bolts!

13. Bellows: “Run to Failure”
Use of secondary chevron style seal behind bellows provides a back up seal and allows for visual indication of bellows failure.
Material flow path
Secondary Seal (vertical piston pump style seal)
Bellows location
Provides visual indication of bellows failure and allows operator time to repair before affecting production.

14. E4-60 Energy Consumption

15. E2-30 Energy Consumption

16. ITW Group – Finishing Division
Binks Smart Pumps
ITW Ransburg – Binks
ITW Group – Finishing Division
320 Phillips Ave
Toledo OH