1. FLOTATION

2. INTRODUCTION

4. Objective of Using Flotation
Used for
the removal of:
- Suspended Solids
- Oil and Grease
from wastewater
the seperation and concentration of sludges

5. Mechanism of Flotation
If density of particle < density of water  can be separated by flotation
e.g. ?
Petroleum industry
Edible oil industry
Fiber recycling in paper industry

6. Flotation Types Simple flotation Flotation with aeration
Dissolved air flotation
Electroflotation
Vacuum flotation

10. Principal components of flotation system
Pressurized pump  elevated pressure to increase solubility
Air-injection facilities
Retention tank (saturation tank)  1-3 min
Back pressure regulation device  constant head on pressurizing pump
Flotation unit  circular / rectangular with a skimming device

11. DAF

14. The technology was first pioneered in Sweden in the 1960s but its use has been reported from many other countries since.
A rapid gravity sand or anthracite–sand filter is incorporated in the lower section of the flotation tank such that the effluent from the flotation stage flows directly onto the filter bed. Consequently, the combined unit requires additional depth, up to 2 m, to house the filter bed and underdrain system.

15. The process offers two main advantages over traditional systems:
disturbances in the flow which may cause the flocs to break are minimized, and
(2) the system can easily be switched to filtration-only operation with the DAF coming on line only when the water becomes excessively polluted.

16. Counter current flotation (CoCoDAFF )
Traditional DAF plants work in a co-current mode whereby the bubbles and incoming water are contacted together at the bottom of the tank and then the combined flow travels in a horizontal direction in the separation zone.
CoCoDAFF operates in a counter current direction with the flow maintained in a vertical direction enhancing both bubble–particle interactions and the time in the contact zone.
A key attribute of the system is that the incoming flow is evenly distributed across the flotation tank through a series of submerged laterals and distribution cones .